Routing MCQ Quiz Hub

1. An/A ..........routing scheme is designed to enable switches to react to changing traffic patterns on the network.
static routing
fixed alternative routing
standard routing
dynamic routing

2. The Routing Information Protocol(RIP) is an intra domain routing based on ........routing.
distance vector
link state
path vector
distance code

3. The term ........ refers to which node or nodes in the network are responsible for the routing decision.
decision place
routing place
node place
switching place

4. In ....... routing the least cost route between any two nodes is the minimum distance.
path vector
distance vector
link state
switching

5. For centralized routing the decision is made by some designated node called ......
designated center
control center
network center
network control center

6. For purposes of routing, the Internet is divided into .......
wide area networks
autonomous networks
local area networks
autonomous system

7. In .......... a route is selected for each destination pair of nodes in the network.
flooding
variable routing
fixed routing
random routing

8. To create a neighborhood relationship, a router running BGP sends an .......... message.
open
update
keep alive
Close()

9. The technique which requires no network information required is ....
flooding
variable routing
fixed routing
random routing

10. An area is ....
part of an AS
composed of at least two AS
another term for an AS
composed more than two AS

11. Which of the following produces high traffic network?
Variable routing
Flooding
Fixed routing
Random routing

12. In ........... routing, we assume that there is one node (or more) in each autonomous system that acts on behave of the entire autonomous system.
distant vector
path vector
link state
multipoint

13. When a direct delivery is made, both the deliverer and receiver have the same ....
routing table
host id
IP address
Net id

14. In OSPF, a ......... link is a network with several routers attached to it.
point-to-point
transient
stub
multipoint

15. In ....... routing, the mask and the destination address are both 0.0.0.0 in routing table.
next-hop
host-specific
network-specific
default

16. In .......... the router forwards the receive packet through only one of its interfaces.
unicasting
multicasting
broadcasting
point to point

17. The network layer is concerned with _____of data.
bits
frames
packets
bytes

18. Which one of the following is not a function of network layer?
routing
inter-networking
congestion control
error control

19. In virtual circuit network each packet contains ____
full source and destination address
a short VC number
only source address
only destination address

20. Which of the following is not correct in relation to multi-destination routing?
is same as broadcast routing
contains the list of all destinations
data is not sent by packets
there are multiple receivers

21. A subset of a network that includes all the routers but contains no loops is called _____
spanning tree
spider structure
spider tree
special tree

22. Which one is used to perform routing in OSI network architecture?
session layer
data link layer
transport layer
network layer

23. Select from the following which one in the routing algorithm can be used for network layer design.
shortest path algorithm
link-state routing
distance vector routing
All of the mentioned

24. Select the subset of a network that contains all the routers but has no loops is known as
spider tree
spider structure
spanning-tree
None of the mentioned

25. Select from the following which command is used to operate TCP/IP routing table
Show IP route
Route
Ipconfig
Traceroute

26. Choose the function of a router
changing the data from one format to another
error detection in data
send the packet to the uplinks
none of the above

27. Select the work of the Router to do in a network.
identified on which outing link a packet is to be sent
send a packet to the next free outgoing link
send a packet to all outgoing links
send a packet to all outgoing links except the originated link

28. The Routing tables of a router used to keep?
MAC Address Assignments
Port Assignments to network devices
Distribute IP address to network devices
The routes for forwarding the data to its destination

29. Select the size of the Source and Destination IP address in the IP header.
4 bits
32 bits
16 bits
8 bits

30. Which one is the natural mask for a class C Network?
255.255.255.1
255.255.255.255
255.255.255.254
255.255.255.0

31. 172.31.25.151 is an example of which one?
Public
Private
Class A
Class E

32. Select the uses of the switch in a datagram network.
destination address
routing table
sender address
header

33. The Routing processor searches in the routing table is known as
switch fabric
table lookup
buffer
rolling table

34. Select the command is used to manipulate the TCP/IP routing table.
Ifconfig
Ipconfig
route
Traceroute

35. Which utility used, If you want to find the number of routers between a source and destination.
route
Traceroute
Ifconfig
Ipconfig

36. Select which one is used to related to config in Microsoft Windows.
Display all current TCP/IP network configuration values
Modify DNS settings
Modify DHCP settings
All of the above

37. Which is used in delivery, both the deliverer of the IP packet and the destination are on the same network.
a connectionless
indirect
a direct
none of the above

38. Select from the following in which forwarding, the complete IP address of a destination is provided in the routing table.
next-hop
host-specific
network-specific
default

39. Choose from the following in which one forwarding, the mask, and destination addresses are both 0.0.0.0 in the routing table.
next-hop
default
host-specific
Network-Specific Membership

40. The principle of ...........states that the routing table is stored from the longest mask to the shortest mask.
first mask matching
shortest mask matching
longest mask matching
very shortest mask matching

41. ........ are two popular examples of distance vector routing protocols.
OSPF and RIP
RIP and BGP
BGP and OSPF
BGP and SPF

42. ...... deals with the issues of creating and maintaining routing tables.
Forwarding
Routing
Directing
None directing

43. During an adverse condition, the length of time for every device in the network to produce an accurate routing table is called the .......
accurate time
integrated time
convergence time
average time

44. A ......... routing table contains information entered manually.
static
dynamic
hierarchical
non static

45. Which of the following is/are the uses of static routing methods.
To manually define a default route.
To provide more secure network environment.
To provide more efficient resource utilization.
All of the above

46. A .......... routing table is updated periodically using one of the dynamic routing protocols.
static
dynamic
hierarchical
non static

47. Which of the following is not the category of dynamic routing algorithm.
Distance vector protocols
Link state protocols
Hybrid protocols
Automatic state protocols

48. In ......... forwarding, the full IP address of a destination is given in the routing table.
next-hop
network-specific
host-specific
default

49. To build the routing table, ........... algorithms allow routers to automatically discover and maintain awareness or the paths through the network.
Static routing
Dynamic routing
Hybrid routing
Automatic routing

50. In .......... forwarding, the mask and destination addresses are both 0.0.0.0 in the routing table.
next-hop
network-specific
host-specific
default