The general requirement in constructing a reinforced concrete road is to place a single layer of reinforcement

  1. Home
  2. Back

Question:
The general requirement in constructing a reinforced concrete road is to place a single layer of reinforcement

1.at the middle

2.near the bottom of the slab

3.near the top of the slab

4.equally distributed at the top and bottom

Posted Date:-2022-09-22 14:10:51

More MCQS Questions and answers

  1. A basic requirement of intersection at grade is
  2. A channelization island should have
  3. A pavement is classified as flexible or rigid based on its
  4. Camber is provided in the road for
  5. Critical load position in a rigid pavement design is taken as
  6. Dowel bars are used in rigid pavements
  7. Enoscope is used to find
  8. For designing highways, IRC recommends the coefficient of friction as
  9. For earthen roads in heavy rainfall area common camber is
  10. For highways width of formation in plan area is
  11. For rapid curing cutbacks, the oil used is
  12. From CBR chart recommended by IRC thickness obtained is
  13. In case of hill roads, the extra widening is generally provided
  14. In steep terrain ruling gradient is limited to
  15. IRC recommends spacing between two consecutive expansion joints should not be more than
  16. Joints in concrete roads are filled with
  17. Length of a vehicle affects
  18. Length of the transition curve is decided on the basis of
  19. Longitudinal joints in rigid pavements
  20. Minimum of 8 m width and 2 m wide shoulders on the following roads are recommended
  21. Most suitable material for highway embankment is
  22. Mostly used road in India is
  23. Percentage of free carbon in bitumen is
  24. Recommended right of way for highways in open areas is
  25. Sight distance at intersection should be equal to
  26. The camber of road should be approximately equal to
  27. The factor influencing camber is
  28. The general requirement in constructing a reinforced concrete road is to place a single layer of reinforcement
  29. The general requirement in constructing a reinforced concrete road is to place a single layer of reinforcement
  30. The instrument used to study spot speed in traffic engineering is
  31. The length of vehicle controls the design of
  32. The longest road constructed during the time of Shershah Suri was from
  33. The main object of a preliminary survey
  34. The most economical lighting layout which is suitable for narrow roads is
  35. The order in which a road is built is
  36. The road connecting a city to highway is called
  37. The sequence of survey in a road project is
  38. To overtake a vehicle going at 40 kmph on two lane highway OSD is
  39. Traffic volume is
  40. Transition curves are required to
  41. Warning signs are on plates of _____ shape.
  42. When bituminous surfacing is done on already existing black road the type of treatment to be given is
  43. Which of the following premix method is used for base course?
  44. Which one of the following is not a informatory sign?
  45. Which one of the following is not a type of transition curve used?
Search
R4R Team
R4Rin Top Tutorials are Core Java,Hibernate ,Spring,Sturts.The content on R4R.in website is done by expert team not only with the help of books but along with the strong professional knowledge in all context like coding,designing, marketing,etc!