A quality objective for a software team is achieve in how many DRE approaches?
1.2
2.3
3.1
4.4
Posted Date:-2021-06-15 12:47:02
Abbreviate the term PERT.
1.Program Evolution & Review Technique
2.Process Evolution & Review Tool
3.Project Evalution & Request Technique
4.None of the above
Posted Date:-2021-06-15 12:47:02
Abbreviate the term SRS.
1.Software Requirement Specification
2.Software Refining Solution
3.Software Resource Source
4.None of the above
Posted Date:-2021-06-15 12:47:02
An effective risk management plan will need to address which of the following issues?
1.Risk avoidance
2.Risk monitoring
3.Contingency planning
4.All mentioned above
Posted Date:-2021-06-15 12:47:02
From the following which method will be adopted in Reuse process?
1.Either by keeping requirements same and adjusting components
2.By keeping components same and modifying requirements.
3.Both A & B
4.None of the above
Posted Date:-2021-06-15 12:47:02
Function oriented metric were first proposed by ___________ and he suggested a measure called the __________ .
1.Barry Boehm, KLOC.
2.Barry Boehm, Function point.
3.Albrecht, Function point.
4.Albrecht, KLOC
Posted Date:-2021-06-15 12:47:02
If the software process were not based on scientific and engineering concepts it would be easier to re-create new software than to scale an existing one, is known as________ .
1.Cost
2.Dynamic Management
3.Large Software
4.Scalability
Posted Date:-2021-06-15 12:47:02
In project execution and monitoring, every project is divided into multiple phases according to that in which phase of SDLC all major tasks are performed?
1.Milestones checklist
2.Status reports
3.Activity monitoring
4.None of the above
Posted Date:-2021-06-15 12:47:02
In Re-engineering process which concepts in order to get re-engineered software?
1.Apply forward engineering
2.Perform
3.Decide
4.Re-structure program
Posted Date:-2021-06-15 12:47:02
In Risk management process what makes a note of all possible risks, that may occur in the project?
1.Manage
2.Monitor
3.Categorize
4.Identification
Posted Date:-2021-06-15 12:47:02
In software maintenance removing errors spotted by users is known as _______.
1.Adaptive
2.Corrective
3.Perfective
4.Preventive
Posted Date:-2021-06-15 12:47:02
In the requirement analysis which model depicts how the software behaves as a consequence of external events?
1.Class-Oriented models
2.Scenario-based models
3.Flow-oriented models
4.Behavioural models
Posted Date:-2021-06-15 12:47:02
In the requirement analysis which model depicts the information domain for the problem?
1.Data models
2.Class-Oriented models
3.Scenario-based models
4.Flow-oriented models
Posted Date:-2021-06-15 12:47:02
Knowledge of software program, design and structure is essential in _______ .
1.Black-box testing
2.White-box testing
3.Integration testing
4.None of the above
Posted Date:-2021-06-15 12:47:02
Line of code(LOC) can be used to normalize quality and/or productivity measure for _______ .
1.Extended function point metrics
2.Function point metrics.
3.Size oriented metrics.
4.None of the above.
Posted Date:-2021-06-15 12:47:02
Measure of reliability is given by ______ .
1.Mean Time between success.
2.Mean reliable
3.Mean Time between failure (MTBF).
4.MTTR
Posted Date:-2021-06-15 12:47:02
Measurements can be categorized in two ways. What are those two ways?
1.Direct and Indirect
2.Front and Rear
3.Metric
4.Quality and Reliability.
Posted Date:-2021-06-15 12:47:02
Quality of the product comes under which type of measures?
1.Indirect measures
2.Direct measures
3.Coding
4.None of the above.
Posted Date:-2021-06-15 12:47:02
Techniques that allows a software engineer to understand how a work process is completed when several people are included, is called _______ .
1.Work flow analysis
2.Does not track potential risks
3.Cover problem areas before they go critical
4.Does not adjust work flow or tasks
Posted Date:-2021-06-15 12:47:02
The evaluation of metrics resulting in insight and the quality of the representation is ___________ .
1.Analysis
2.Formulation
3.Interpretation
4.Feedback
Posted Date:-2021-06-15 12:47:02
The New modules, that are need to be replaced or modified, and they are also designed against requirement specifications set in the previous stage is ______ .
1.Acceptance testing
2.System Testing
3.Delivery
4.Design
Posted Date:-2021-06-15 12:47:02
The process togather the software requirements from Client, Analyze and Document is known as ______ .
1.Requirement engineering process
2.Requirement elicitation process
3.User interface requirements
4.Software system analyst
Posted Date:-2021-06-15 12:47:02
The software becomes more popular if its user interface is __________ .
1.Attractive
2.Simple to use
3.Responsive in short time
4.All mentioned above
Posted Date:-2021-06-15 12:47:02
The software design paradigm is a part of software development and it includes ________ .
1.Design, Maintenance, Programming
2.Coding, Testing, Integration
3.Requirement gathering, Software design, Programming
4.None of the above
Posted Date:-2021-06-15 12:47:02
To compute Function Point (FP) which of the following relationship is used? Where Fi = complexity adjustment values.
1.FP = count total *[0.01 *S(Fi)]
2.FP = count total *[0.65 + 0.01 *S(Fi)]
3.FP = count total *[0.65]
4.None of the above.
Posted Date:-2021-06-15 12:47:02
What does Statistical Quality Assurance involve?
1.Tracking each defect to its underlying cause
2.Isolated the "vital few" cause
3.Moving to correct them
4.All mentioned above
Posted Date:-2021-06-15 12:47:02
What is a black box testing method that divides the input domain of a program into classes of data from which test cases can be derived?
1.Binary partitioning
2.Equivalence partitioning
3.State-based partitioning
4.Attribute-based partitioning
Posted Date:-2021-06-15 12:47:02
What is a measure of how well a computer system facilities learning?
1.Usability
2.Functionality
3.Reliability
4.None of the above
Posted Date:-2021-06-15 12:47:02
What is a text-based notifier that is mostly shows the context in which the user is working, and it is also generated by the software system?
1.Command prompt
2.Cursor
3.Command
4.All mentioned above
Posted Date:-2021-06-15 12:47:02
What is tested to uncover errors that indicate lack of conformance to customer requirements in the dimensions of quality?
1.Structure
2.Function
3.Usability
4.Navigation
Posted Date:-2021-06-15 12:47:02
What is the level of metrics and indicators that are available to measure the process and quality?
1.Optimized
2.Defined
3.Quantitatively Managed
4.Managed
Posted Date:-2021-06-15 12:47:02
What is the software component repository is referred by designers to search for the matching component on the basis of functionality and intended software requirements?
1.Search suitable components
2.Specify components
3.Requirement specification
4.Incorporate components
Posted Date:-2021-06-15 12:47:02
What should a software team apply for limited resources in a way that has the highest likelihood of achieving a high-quality result?
1.Requirement quality
2.Design quality
3.Code quality
4.Quality control effectiveness
Posted Date:-2021-06-15 12:47:02
What should they focus on consequences that affect on the Software Risk Impact Assessment?
1.Performance
2.Support and cost
3.Schedule
4.All mentioned above
Posted Date:-2021-06-15 12:47:02
When elements of module are grouped because the output of one element serves as input to another and so on, it is called ________ .
1.Functional cohesion
2.Sequential cohesion
3.Communicational cohesion
4.Procedural cohesion
Posted Date:-2021-06-15 12:47:02
Which core steps are defined by six sigma methodology?
1.Analyze
2.Define
3.Measure
4.All mentioned above
Posted Date:-2021-06-15 12:47:02
Which feature relieves anxiety, so the user knows that errors can be undone?
1.Support internal locus of control
2.Permit easy reversal of actions
3.Offer simple error handling
4.Design dialog to yield closure
Posted Date:-2021-06-15 12:47:02
Which is a logical grouping of data that resides within the application’s boundary and it is maintained via external inputs?
1.Number of external interface files
2.Number of internal logical files
3.Number of external inquiries
4.Number of external inputs
Posted Date:-2021-06-15 12:47:02
Which is the characteristics of Software risk?
1.Uncertainty
2.Loss
3.Both A & B
4.None of the above
Posted Date:-2021-06-15 12:47:02
Which is the degree where the software performs its required function?
1.Correctness
2.Clarity
3.Completeness
4.Consistency
Posted Date:-2021-06-15 12:47:02
Which is the publishing subsystem that does not require any further processing and are transmitted directly to the client side?
1.Static elements
2.Publication services
3.External services
4.None of the above
Posted Date:-2021-06-15 12:47:02
Which is the way where the CMMI process meta model can be represented?
1.A continuous model
2.A staged model
3.Both A & B
4.None of the above
Posted Date:-2021-06-15 12:47:02
Which model depicts the profile of the end users of a computer system?
1.User model
2.Requirements model
3.Design model
4.State model
Posted Date:-2021-06-15 12:47:02
Which of the following is/are considered stakeholder in the software process?
1.Customers
2.End-users
3.Project managers
4.All of the above.
Posted Date:-2021-06-15 12:47:02
Which of the following provides semi-automatic and automatic support to methods in a layered technology?
1.Methods
2.Tools
3.Process
4.Quality Focus
Posted Date:-2021-06-15 12:47:02
Which of these activities is not one of the activities recommended to be performed by an independent SQA group?
1.Serve as the sole test team for any software produced.
2.The tools and methods that support SQA actions and tasks.
3.Software configuration management procedures.
4.Organizational roles and responsibilities relative to product quality.
Posted Date:-2021-06-15 12:47:02
Which SDLC activity does the user initiates the request for a desired software product?
1.Requirement gathering
2.Implementation
3.Disposition
4.Communication
Posted Date:-2021-06-15 12:47:02
Which software works strictly according to defined specifications and solutions?
1.Static-type
2.Practical-type
3.Embedded-type
4.None of the above
Posted Date:-2021-06-15 12:47:02
Which tools are used to represent the system components, data and control flow among various software components and a system structure in a graphical form?
1.Process modeling tools
2.Project management tools
3.Diagram tools
4.Documentation tools
Posted Date:-2021-06-15 12:47:02
Which type of DFD shows how the data flow is actually implemented in the system and it is also more specific and close to the implementation?
1.Logical DFD
2.Physical DFD
3.Both A & B
4.None of the above
Posted Date:-2021-06-15 12:47:02