Engineering/Civil Engineering MCQS -Building Materials Section 3 Sample Test,Sample questions

Question:
 
Duco is one of the patent forms of

1. emulsion paints

2.plastic paints

3.bituminous paints

4.cellulose paints.

Posted Date:-2021-03-25 23:59:36


Question:
 
Knots in timber are

1.defects caused by crushing fibres

2.splits radiating from the centre

3.speckled strains

4.signs of branches cut off.

Posted Date:-2021-03-25 23:59:36


Question:
 
Pick up the correct statement from the following:

1.Solder material is an alloy which melts at a temperature above 400°C

2.Brazing is done at temperature above 600°C to 1100°C

3.Brazing joint is stronger than the solder joint

4.all the above.

Posted Date:-2021-03-25 23:59:36


Question:
 
Turpentine oil is used in paints as

1.thinner

2.vehicle

3.base

4.drier.

Posted Date:-2021-03-25 23:59:36


Question:
  
Bulking of sand is caused due to

1.surface moisture

2.air voids

3.viscosity

4.clay contents

Posted Date:-2021-03-25 23:59:36


Question:
  
Dextrin is

1.animal glue

2.starch glue

3. albumin glue

4. rubber based adhesive

Posted Date:-2021-03-25 23:59:36


Question:
  
Dextrin is

1.animal glue

2.starch glue

3.albumin glue

4.rubber based adhesive

Posted Date:-2021-03-25 23:59:36


Question:
  
If water required for 1 bag of cement is 30 litres, the water cement ratio is :

1.0.4

2.0.5

3.0.6

4.None of these.

Posted Date:-2021-03-25 23:59:36


Question:
  
In paints, the pigment is responsible for

1.durability

2.colour

3.smoothness

4.None of these.

Posted Date:-2021-03-25 23:59:36


Question:
  
Quick setting cement is produced by adding

1.less amount of gypsum in very fine powdered form

2. more amount of gypsum in very fine powdered form

3.aluminium sulphate in very fine powdered form

4.pozzolana in very fine powdered form

Posted Date:-2021-03-25 23:59:36


Question:
  
Stones used for ornamental work must be

1.soft

2.hard

3.light

4.heavy

Posted Date:-2021-03-25 23:59:36


Question:
  
The cracks caused by shrinkage of the exterior surface of the wood exposed to atmosphere, are called:

1.radial shakes

2. heart shakes

3.wind cracks

4.twisted fibres

Posted Date:-2021-03-25 23:59:36


Question:
Bituminous fells are used for

1.covering A.C. sheets

2.covering sloping roofs

3.D.P.C.

4.none to these.

Posted Date:-2021-03-25 23:59:36


Question:
Dry rot

1.cracks the timber

2.reduces the strength of timber

3. reduces the timber to powder

4.shrinks the timber

Posted Date:-2021-03-25 23:59:36


Question:
During pudding

1.molten metal is kept clear of the fuel

2.molten metal is kept clear of the fuel

3.silicon forms a slag

4.all the above.

Posted Date:-2021-03-25 23:59:36


Question:
Fibre boards can be

1.distempered

2.painted

3.painted and distempered

4.used for furniture.

Posted Date:-2021-03-25 23:59:36


Question:
For the manufacture of stainless steel, steel is mixed with

1.chromium

2.nickel

3.tungsten

4.none of these.

Posted Date:-2021-03-25 23:59:36


Question:
German silver is an alloy of

1.zinc, lead and nickel

2.silver, gold and lead

3.copper, nickel and zinc

4.copper, brass and zinc

Posted Date:-2021-03-25 23:59:36


Question:
Initial setting of cement is caused due to

1.Tri-calcium silicate

2. Di-calcium silicate

3. Tri-calcium aluminate

4.Tetra calcium alumino ferrite.

Posted Date:-2021-03-25 23:59:36


Question:
Iron ore may contain

1.carbon

2.silicon

3.sulphur

4.all the above.

Posted Date:-2021-03-25 23:59:36


Question:
Lime concrete is generally used for

1.wall foundations

2.flooring at ground level

3.both (a) and (b)

4.neither (a) nor (b).

Posted Date:-2021-03-25 23:59:36


Question:
Pick up correct statement from the following:

1.Fibre boards are used for thermal and acoustic control

2.Fibre boards are used for light weight standing members

3.Fibre boards are obtained by impregnating a resin product on fibres

4.all the above.

Posted Date:-2021-03-25 23:59:36


Question:
Pick up the correct statement from the 

1.The substance which consists of one primary chemical, is known as monomer

2.The polymer consists of thousands of monomers joined together

3.The polymer molecule is called macro-molecule

4.All the above.

Posted Date:-2021-03-25 23:59:36


Question:
Pick up the correct statement from the following:

1.The phenol is carbolic acid

2.he phenol is either extracted from coal-tar or prepared from benzene

3.Phenol reacts with formaldehyde, to form phenol formaldehyde resin

4.all the above.

Posted Date:-2021-03-25 23:59:36


Question:
Pick up the correct statement from the following:

1.Catalysts are added to assist and accelerate the hardening of resin,

2.The fillers are inert materials and they impart strength and hardness

3. Fibrous fillers increase thermal resistance

4.All the above.

Posted Date:-2021-03-25 23:59:36


Question:
Pick up the correct statement from the following:

1.Corrugated sheet iron is made by passing plain sheets between grooved rollers

2.Strength and stiffness of corrugated sheets are considerably increased

3.Corrugated sheets are generally gal-venised to protect iron from corrosion by rust

4.all the above.

Posted Date:-2021-03-25 23:59:36


Question:
Pick up the correct statement from the following:

1.Plastics have generally low melting point

2. The coefficient of thermal expansion of plastics is about three times than that of steel

3.The acoustical boards prepared by impregnating fibre-glass with phenolic resins has absorption coefficient of about 0.67

4.All the above.

Posted Date:-2021-03-25 23:59:36


Question:
Pick up the correct statement from the following:

1.Quick lime is obtained by burning pure lime stone:

2.Hydraulic lime is obtained by burning lime stone containing clay 5% to 30%

3.Poor lime is obtained by burning lime stone containing impurities more than 5%

4.All the above.

Posted Date:-2021-03-25 23:59:36


Question:
Pick up the incorrect statement from the following:

1.Plastics are chemical resistant

2.Plastics are durable

3.Plastics are ductile

4.Plastics are excellent electric insulators.

Posted Date:-2021-03-25 23:59:36


Question:
Portland cement manufactured from pure white chalk and clay but free from iron-oxide, is known as

1.quick setting cement

2.rapid hardening cement

3.white cement

4. low heat Portland cement.

Posted Date:-2021-03-25 23:59:36


Question:
Portland pozzolana cement possesses

1.higher resistance to chemical attack

2.lower heat of hydration

3. lower shrinkage on drying

4.all the above.

Posted Date:-2021-03-25 23:59:36


Question:
Pozzolana (or surkhi) is used in lime

1.to impart hydraulicity

2. to prevent shrinkage

3.to decrease the cost of construction

4.to decrease the setting time.

Posted Date:-2021-03-25 23:59:36


Question:
Quartzite, a metamorphic stone is

1.hard

2.brittle

3.crystalline

4.All the above.

Posted Date:-2021-03-25 23:59:36


Question:
Smith's test of stones is performed to find out

1.the presence of soluble matter of stone

2.the compressive strength of the stone

3.the hardness of the stone

4.the toughness of the stone.

Posted Date:-2021-03-25 23:59:36


Question:
Stuco paints are suitable for

1.stone masonry

2.brick walls

3.both (a) and (b)

4. neither (a) nor (b).

Posted Date:-2021-03-25 23:59:36


Question:
The commonly used drying oil for oil paints, is

1.accetate of lead.

2.olive oil

3.linseed oil

4.kerosine oil

Posted Date:-2021-03-25 23:59:36


Question:
The foliated structure is very common in

1.sedimentary rocks

2.igneous rocks

3.metamorphic rocks

4.none of these.

Posted Date:-2021-03-25 23:59:36


Question:
The hardest rock is

1.marble

2.diamond

3.talc

4.quartz.

Posted Date:-2021-03-25 23:59:36


Question:
The minimum compressive strength of Ilnd class bricks should be

1. 75 kg/cm2

2. 100 kg/cm2

3. 120 kg/cm2

4. 150 kg/cm2

Posted Date:-2021-03-25 23:59:36


Question:
The normal curing period for lime mortar, is:

1.one day

2.3 days

3.7 days

4.10 days

Posted Date:-2021-03-25 23:59:36


Question:
The operation of removal of impurities or clay adhering to iron ores, is known as

1.dressing

2.dressing

3.roasting

4.smelting.

Posted Date:-2021-03-25 23:59:36


Question:
The presence of original rounded surface on the manufactured piece of timber, is called

1.Wane

2.Torn grain

3.Diagonal grain

4.Chipmark.

Posted Date:-2021-03-25 23:59:36


Question:
The process of decarbonising the pig iron completely and then adding proper percentage of carbon for manufacturing steel, is called

1.Cementation process

2.crucible process

3.Bessemer process

4.Open hearth process.

Posted Date:-2021-03-25 23:59:36


Question:
The silica is used for preparing

1.silica bricks

2.coke oven

3. lining for glass furnaces

4.all of these.

Posted Date:-2021-03-25 23:59:36


Question:
The timber having maximum resistance against white ants, is obtained from

1.chir

2.shisham

3.sal

4.teak

Posted Date:-2021-03-25 23:59:36


Question:
The type of steel used for precision levelling staff, is

1.Titanium steel

2.Carbon steel

3.Invar

4. Stainless steel.

Posted Date:-2021-03-25 23:59:36


Question:
The weight of 1 m3 of brick earth, is about

1.1200 kg

2.1500 kg

3.1800 kg

4.2000 kg

Posted Date:-2021-03-25 23:59:36


Question:
Which one of the following polymers is obtained from condensation polymerization ?

1.phenol formaldehyde

2.carbamide

3.melamine-formaldehyde

4. all of these.

Posted Date:-2021-03-25 23:59:36


Question:
Wrought iron is manufactured from pig iron by

1.refining

2.puddling

3.shingling

4.all the above.

Posted Date:-2021-03-25 23:59:36


Question:
Wrought iron is used for

1.structural works in beams

2.small sized water pipes

3.columns and struts

4.none to these.

Posted Date:-2021-03-25 23:59:36


More MCQS

  1. Civil Engineering MCQS -Building Materials Section 1
  2. Civil Engineering MCQS -Building Materials Section 2
  3. Civil Engineering MCQS -Building Materials Section 3
  4. Civil Engineering MCQS -Building Materials Section 4
  5. Mechanical Engineering Engineering MCQS -Mechanics Section-1
  6. Mechanical Engineering Engineering MCQS -Mechanics Section-2
  7. Civil Engineering MCQS -Building Materials Section 5
  8. Civil Engineering MCQS -Building Materials Section 6
  9. Civil Engineering MCQS -Building Materials Section 7
  10. Civil Engineering MCQS -Building Materials Section 8
  11. Civil Engineering MCQS-Surveying Section 1
  12. Civil Engineering MCQS-Surveying Section 2
  13. Civil Engineering MCQS-Surveying Section 3
  14. Civil Engineering MCQS-Surveying Section 4
  15. Civil Engineering MCQS-Surveying Section 5
  16. Civil Engineering MCQS-Surveying Section 6
  17. Civil Engineering MCQS-Surveying Section 7
  18. Civil Engineering MCQS-Surveying Section 8
  19. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 1
  20. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 2
  21. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 3
  22. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 4
  23. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 5
  24. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 6
  25. Civil Engineering [MCQS] Applied Mechanics Section -1
  26. Civil Engineering [MCQS] Applied Mechanics Section -2
  27. Civil Engineering [MCQS] Applied Mechanics Section -3
  28. Civil Engineering [MCQS] Applied Mechanics Section -4
  29. Civil Engineering [MCQS] Applied Mechanics Section -5
  30. Civil Engineering -MCQS-Hydraulics Section 1
  31. Civil Engineering -MCQS-Hydraulics Section 2
  32. Civil Engineering -MCQS-Hydraulics Section 3
  33. Civil Engineering -MCQS-Hydraulics Section 4
  34. Civil Engineering -MCQS-Hydraulics Section 5
  35. Civil Engineering -MCQS-Hydraulics Section 6
  36. Civil Engineering -MCQS-Waste Water Engineering - Section 1
  37. Civil Engineering -MCQS-Waste Water Engineering - Section 2
  38. Civil Engineering -MCQS-Waste Water Engineering - Section 3
  39. Civil -MCQ RCC Structures Design - Section 1
  40. Civil -MCQ RCC Structures Design - Section 2
  41. Civil -MCQ RCC Structures Design - Section 3
  42. Engineering Electrical Engineering Dc Motors part1
  43. Engineering Electrical Engineering Dc Motors part 2
  44. Engineering Electrical Engineering Dc Motors part3
  45. Electric Drives MCQ Questions and Answers
  46. Automobile Engineering MCQ Set 01
  47. Automobile Engineering MCQ Set 02
  48. Automobile Engineering MCQ Set 03
  49. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 01
  50. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 02
  51. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 03
  52. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 04
  53. Machine Design Mcq set 01
  54. Machine Design Mcq set 02
  55. Machine Design Mcq set 3
  56. Mechanical Engineering Design MCQ SET 03
  57. Mechanical Engineering Design MCQ SET 04
  58. Advanced Surveying mcq set 1
  59. Automobile Engineering MCQ
  60. Basic Civil Engineering Mcq
  61. Microwave Engineering Mcq Set 1
  62. Microwave Engineering Mcq Set 2
  63. Microwave Engineering Mcq Set 3
  64. Mechanical Engineering Basic Mcq Questions Set 1
  65. Mechanical Engineering Basic Mcq Questions Set 2
  66. Basic Chemical Engineering MCQ
  67. Chemical Engineering MCQ Question Set 1
  68. Chemical Engineering Mcq Question Set 2
  69. Chemical Engineering Mcq Question Set 3
  70. Chemical Engineering Mcq Question Set 4
  71. Chemical Engineering Mcq Question Set 5
  72. Chemical Engineering Mcq Question Set 6
  73. Chemical Engineering Mcq Question Set 7
  74. Chemical Engineering Mcq Question Set 8
  75. Civil Engineering Basic Set 1
  76. Chemical Engineering Mcq Question Set 9
  77. Chemical Engineering Mcq Question Set 10
  78. Civil Engineering Basic Set 2
  79. Chemical Engineering Mcq Question Set 11
  80. Chemical Engineering Mcq Question Set 12
  81. Engineering Electrical Engineering
  82. Chemical Engineering Mcq Question Set 14
  83. Chemical Engineering Mcq Question Set 15
  84. Chemical Engineering Mcq Question Set 16
  85. Chemical Engineering Mcq Question Set 17
  86. Engineering Electronics & Communication Engineering
  87. Engineering Computer Science & Engineering
  88. Computer Science & Engineering Computer Networks Mcq
  89. Environmental Engineering MCQ
  90. Microwave Engineering ECE Mcq
  91. Electrical Engineering Mcq
  92. Engineering Branch Wise MCQs
  93. Software Engineering Multiple Choice Questions
  94. Traffic Engineering MCQ
  95. Highway Engineering MCQs
  96. Engineering Thermodynamics MCQs
  97. Materials and Processes -Notch Toughness
  98. Software Engineering Multiple Choice Question Set 1
  99. Software Engineering Multiple Choice Question Set 2
  100. Software Engineering Multiple Choice Question Set 3
  101. Software Engineering Multiple Choice Question Set 4
  102. Hydraulic Machines MCQs Set-1
  103. Hydraulic Machines MCQs Set-2
  104. Hydraulic Machines MCQs Set-3
  105. Hydraulic Machines MCQs Set-4
Search
R4R Team
R4Rin Top Tutorials are Core Java,Hibernate ,Spring,Sturts.The content on R4R.in website is done by expert team not only with the help of books but along with the strong professional knowledge in all context like coding,designing, marketing,etc!