Engineering/Civil Engineering MCQS -Building Materials Section 2 Sample Test,Sample questions

Question:
 
Inhaling of fly-ash over a long period causes

1.silicosis

2.fibrosis of lungs

3.bronchitis

4.All of these.

Posted Date:-2021-03-25 23:56:08


Question:
 
Inhaling of fly-ash over a long period causes

1.silicosis

2.fibrosis of lungs

3.bronchitis

4. All of these.

Posted Date:-2021-03-25 23:56:08


Question:
 
Pick up the correct statement from the following:

1.Alexander Parkes; a Scottish chemist prepared a hard material by mixing camphor and alcohol with nitro cellulose and called it; as Parkesite

2.Dr. L. Bakeland; a Belgian scientist prepared a product known as Bakelite

3.Pollark; an Austrian scientist prepared a substance from urea and formaldehyde and called it Plastic

4.All the above.

Posted Date:-2021-03-25 23:56:08


Question:
  
Black marble is generally found in the district of

1.Jodhpur

2.Jaipur

3.Jabalpur

4.Jaisalmer

Posted Date:-2021-03-25 23:56:08


Question:
  
Cast steel is manufactured by

1.Cementation process

2.Crucible process

3. Bessemer process

4. Open hearth process.

Posted Date:-2021-03-25 23:56:08


Question:
  
If P is the percentage of water required for normal consistency; water to be added for determination of initial setting time; is

1.0.70 P

2.0.75 P

3.0.80 P

4. 0.85 P

Posted Date:-2021-03-25 23:56:08


Question:
  
Soundness test of cement determines

1.quality of free lime

2.ultimate strength

3.durability

4.initial setting

Posted Date:-2021-03-25 23:56:08


Question:
  
The lime which contains mainly calcium oxide and slacks with water; is

1.fat lime

2.quick lime

3.hydraulic lime

4. poor lime

Posted Date:-2021-03-25 23:56:08


Question:
  
The standard size of masonry bricks; is

1.18 cm x 8 cm x 8 cm

2.19 cm x 9 cm x 9 cm

3.20 cm x 10 cm x 10 cm

4.21 cm x 11 cm x 11 cm

Posted Date:-2021-03-25 23:56:08


Question:
A 1st class brick immersed in water for 24 hours; should not absorb water (by weight) more than

1.10%

2.15%

3.20%

4.25%

Posted Date:-2021-03-25 23:56:08


Question:
A badly mixed cement concrete results in

1.segregation

2.bleeding

3. honey combing

4.none to these.

Posted Date:-2021-03-25 23:56:08


Question:
A good brick earth should contain :

1.about 20% to 30% of alumina

2.about 50% to 60% of silica

3.not more than 5% of lime

4.All the above.

Posted Date:-2021-03-25 23:56:08


Question:
A good quality stone absorbs water less than

1.5%

2.10%

3.15%

4.20%

Posted Date:-2021-03-25 23:56:08


Question:
A pug mill is used for

1.softening brick earth

2.moulding brick earth

3.moulding brick earth

4.providing brick earth

Posted Date:-2021-03-25 23:56:08


Question:
Apiece of sawn timber whose cross-sectional dimensions exceed 5 cm; in one direction and 20 cm in the other direction; is called a

1.cant

2.deal

3.baulk

4.strip.

Posted Date:-2021-03-25 23:56:08


Question:
Bessemer process is used for the manufacture of

1.Pig iron

2.cast iron

3.Wrought iron

4.Steel.

Posted Date:-2021-03-25 23:56:08


Question:
Cement is said to be of good quality if

1. its colour is not greenish grey

2.a handful of cement thrown into a bucket of water does not float

3.a handful of cement thrown into a bucket of water does not float

4.none of these.

Posted Date:-2021-03-25 23:56:08


Question:
Clay and silt content in a good brick earth must be at least

1.50%

2.40%

3.30%

4.25%

Posted Date:-2021-03-25 23:56:08


Question:
Expanded metal is

1.manufactured from steel sheets

2.used for reinforced concrete in road pavements

3.measured in term of SWM (shortway mesh) and LWM (long way mesh)

4.all the above.

Posted Date:-2021-03-25 23:56:08


Question:
For slaking of 10 kg of CaO; the theoretical amount of water is

1.2.2 kg

2.1.5 kg

3.3.2 kg

4. none of these.

Posted Date:-2021-03-25 23:56:08


Question:
For the manufacture of plywood; veneers are placed so that grains of adjacent veneers

1.run at right angles

2.parallel

3.inclined at 45°

4.inclined at 60°.

Posted Date:-2021-03-25 23:56:08


Question:
Geologically; marble is known as

1.sedimentary rock

2. igneous rock

3.metamorphic rock

4.stratified rock.

Posted Date:-2021-03-25 23:56:08


Question:
If the iron ore contains clay as an impurity; the flux added during calcination; is

1.clay

2. lime stone

3. argillaceous iron ore

4.all the above.

Posted Date:-2021-03-25 23:56:08


Question:
Inner part of a timber log surrounding the pith; is called

1.sapwood

2.cambium layer

3.heart wood

4.none to these.

Posted Date:-2021-03-25 23:56:08


Question:
The rocks in which argil (or clay) predominates; are called

1.sillicious rocks

2.argillaceous rocks

3. calcareous rocks

4.igneous rocks.

Posted Date:-2021-03-25 23:56:08


Question:
Mastic asphalt is generally used for

1.damp proof course

2. water proof layer

3.partition walls

4.both (a) and (b).

Posted Date:-2021-03-25 23:56:08


Question:
Minimum of 40% of iron; is available in

1.Magnetite

2.Magnetite

3.Limonite

4.Black band.

Posted Date:-2021-03-25 23:56:08


Question:
Minimum required water cement ratio for a workable concrete; is

1.0.3

2.0.4

3.0.5

4.0.6

Posted Date:-2021-03-25 23:56:08


Question:
Name the type of cement from the following for canal linings :

1.sulphate resisting cement

2.rapid hardening cement

3.quick setting cement

4.pozzuolana cement.

Posted Date:-2021-03-25 23:56:08


Question:
Pick up the correct statement from the following:

1.soft stones are required for carving

2. light stones are required for arches

3.hard stones are required to stand high pressure

4.all the above.

Posted Date:-2021-03-25 23:56:08


Question:
Pick up the correct statement from the following: Method of sawing timber

1.tangentially to annual rings; is known as tangential method.

2.in four quarters such that each board cuts annual rings at angles not less than 45°; is known as quarter sawing method.

3.cut out of quarter logs; parallel to the medullary rays and perpendicular to annual rings; is known as radial sawing.

4.all the above.

Posted Date:-2021-03-25 23:56:08


Question:
Pick up the correct statement regarding low heat cement from the following:

1.It possesses less compressive strength

2.Its initial setting time is about one hour

3. Its final setting time is about 10 hours

4.All the above.

Posted Date:-2021-03-25 23:56:08


Question:
Pick up the plutonic rock from the following:

1.Granite

2.Dolerite

3.Basalt

4.All the above.

Posted Date:-2021-03-25 23:56:08


Question:
Plywood is made from

1.common timber

2.bamboo fibre

3.teak wood only

4.asbestos sheets.

Posted Date:-2021-03-25 23:56:08


Question:
Quick lime (or caustic lime)

1. is obtained by the calcination of pure lime stone

2. has great affinity to moisture

3.is amorphous

4.all the above.

Posted Date:-2021-03-25 23:56:08


Question:
Refractory bricks are used for

1.retaining walls

2.columns

3.piers

4.combustion chambers.

Posted Date:-2021-03-25 23:56:08


Question:
Resins are

1.not soluble in water

2.soluble in spirit

3.used in varnishes

4.all the above.

Posted Date:-2021-03-25 23:56:08


Question:
Rocks formed due to alteration of original structure due to heat and excessive pressure are called

1.sedimentary rocks

2.sedimentary rocks

3.metamorphic rocks

4. none of these.

Posted Date:-2021-03-25 23:56:08


Question:
Seasoning is

1.a process of removing sap

2.creosoting

3.painting with sodium silicate

4.coating with tar.

Posted Date:-2021-03-25 23:56:08


Question:
Shingle is

1.decomposed laterite

2.crushed granite

3.water bound pebbles

4.air weathered rock.

Posted Date:-2021-03-25 23:56:08


Question:
The commonly used lime in white washing; is

1.white lime

2.fat lime

3.hydraulic lime

4.lime

Posted Date:-2021-03-25 23:56:08


Question:
The compound of Portland cement which contributes to the strength after two to three years is

1. Tricalcium silicate

2. Tricalcium silicate

3.Tricalcium aluminate

4. Tetracalcium alumino ferrite.

Posted Date:-2021-03-25 23:56:08


Question:
The filler used in plastic bitumen; is

1.shale powder

2.talc powder

3.asbestos powder

4.plastic powder

Posted Date:-2021-03-25 23:56:08


Question:
The most fire resistant paints are :

1.enamel paints

2.aluminium paints

3. asbestos paints

4. cement paints.

Posted Date:-2021-03-25 23:56:08


Question:
The proportions of charcoal; saltpetre and sulphur in gun powder by weight; are respectively:

1.15; 75; 10

2.75; 10; 15

3.10; 15; 75

4. 10; 75; 15.

Posted Date:-2021-03-25 23:56:08


Question:
The rock generally used for roofing; is

1.granite

2.basalt

3.slate

4.pumice.

Posted Date:-2021-03-25 23:56:08


Question:
The slag which floats on the surface of the molten iron generally contains

1.Lime (CaO) 45%

2. Silica (SiO2) 35%

3.Alumina (Al2O3) 12%

4.all the above.

Posted Date:-2021-03-25 23:56:08


Question:
Which one of the following is an air binding material ?

1.Gypsum

2.Acid-resistant cement

3.Quick lime

4.All of these.

Posted Date:-2021-03-25 23:56:08


More MCQS

  1. Civil Engineering MCQS -Building Materials Section 1
  2. Civil Engineering MCQS -Building Materials Section 2
  3. Civil Engineering MCQS -Building Materials Section 3
  4. Civil Engineering MCQS -Building Materials Section 4
  5. Mechanical Engineering Engineering MCQS -Mechanics Section-1
  6. Mechanical Engineering Engineering MCQS -Mechanics Section-2
  7. Civil Engineering MCQS -Building Materials Section 5
  8. Civil Engineering MCQS -Building Materials Section 6
  9. Civil Engineering MCQS -Building Materials Section 7
  10. Civil Engineering MCQS -Building Materials Section 8
  11. Civil Engineering MCQS-Surveying Section 1
  12. Civil Engineering MCQS-Surveying Section 2
  13. Civil Engineering MCQS-Surveying Section 3
  14. Civil Engineering MCQS-Surveying Section 4
  15. Civil Engineering MCQS-Surveying Section 5
  16. Civil Engineering MCQS-Surveying Section 6
  17. Civil Engineering MCQS-Surveying Section 7
  18. Civil Engineering MCQS-Surveying Section 8
  19. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 1
  20. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 2
  21. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 3
  22. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 4
  23. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 5
  24. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 6
  25. Civil Engineering [MCQS] Applied Mechanics Section -1
  26. Civil Engineering [MCQS] Applied Mechanics Section -2
  27. Civil Engineering [MCQS] Applied Mechanics Section -3
  28. Civil Engineering [MCQS] Applied Mechanics Section -4
  29. Civil Engineering [MCQS] Applied Mechanics Section -5
  30. Civil Engineering -MCQS-Hydraulics Section 1
  31. Civil Engineering -MCQS-Hydraulics Section 2
  32. Civil Engineering -MCQS-Hydraulics Section 3
  33. Civil Engineering -MCQS-Hydraulics Section 4
  34. Civil Engineering -MCQS-Hydraulics Section 5
  35. Civil Engineering -MCQS-Hydraulics Section 6
  36. Civil Engineering -MCQS-Waste Water Engineering - Section 1
  37. Civil Engineering -MCQS-Waste Water Engineering - Section 2
  38. Civil Engineering -MCQS-Waste Water Engineering - Section 3
  39. Civil -MCQ RCC Structures Design - Section 1
  40. Civil -MCQ RCC Structures Design - Section 2
  41. Civil -MCQ RCC Structures Design - Section 3
  42. Engineering Electrical Engineering Dc Motors part1
  43. Engineering Electrical Engineering Dc Motors part 2
  44. Engineering Electrical Engineering Dc Motors part3
  45. Electric Drives MCQ Questions and Answers
  46. Automobile Engineering MCQ Set 01
  47. Automobile Engineering MCQ Set 02
  48. Automobile Engineering MCQ Set 03
  49. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 01
  50. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 02
  51. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 03
  52. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 04
  53. Machine Design Mcq set 01
  54. Machine Design Mcq set 02
  55. Machine Design Mcq set 3
  56. Mechanical Engineering Design MCQ SET 03
  57. Mechanical Engineering Design MCQ SET 04
  58. Advanced Surveying mcq set 1
  59. Automobile Engineering MCQ
  60. Basic Civil Engineering Mcq
  61. Microwave Engineering Mcq Set 1
  62. Microwave Engineering Mcq Set 2
  63. Microwave Engineering Mcq Set 3
  64. Mechanical Engineering Basic Mcq Questions Set 1
  65. Mechanical Engineering Basic Mcq Questions Set 2
  66. Basic Chemical Engineering MCQ
  67. Chemical Engineering MCQ Question Set 1
  68. Chemical Engineering Mcq Question Set 2
  69. Chemical Engineering Mcq Question Set 3
  70. Chemical Engineering Mcq Question Set 4
  71. Chemical Engineering Mcq Question Set 5
  72. Chemical Engineering Mcq Question Set 6
  73. Chemical Engineering Mcq Question Set 7
  74. Chemical Engineering Mcq Question Set 8
  75. Civil Engineering Basic Set 1
  76. Chemical Engineering Mcq Question Set 9
  77. Chemical Engineering Mcq Question Set 10
  78. Civil Engineering Basic Set 2
  79. Chemical Engineering Mcq Question Set 11
  80. Chemical Engineering Mcq Question Set 12
  81. Engineering Electrical Engineering
  82. Chemical Engineering Mcq Question Set 14
  83. Chemical Engineering Mcq Question Set 15
  84. Chemical Engineering Mcq Question Set 16
  85. Chemical Engineering Mcq Question Set 17
  86. Engineering Electronics & Communication Engineering
  87. Engineering Computer Science & Engineering
  88. Computer Science & Engineering Computer Networks Mcq
  89. Environmental Engineering MCQ
  90. Microwave Engineering ECE Mcq
  91. Electrical Engineering Mcq
  92. Engineering Branch Wise MCQs
  93. Software Engineering Multiple Choice Questions
  94. Traffic Engineering MCQ
  95. Highway Engineering MCQs
  96. Engineering Thermodynamics MCQs
  97. Materials and Processes -Notch Toughness
  98. Software Engineering Multiple Choice Question Set 1
  99. Software Engineering Multiple Choice Question Set 2
  100. Software Engineering Multiple Choice Question Set 3
  101. Software Engineering Multiple Choice Question Set 4
  102. Hydraulic Machines MCQs Set-1
  103. Hydraulic Machines MCQs Set-2
  104. Hydraulic Machines MCQs Set-3
  105. Hydraulic Machines MCQs Set-4
Search
R4R Team
R4Rin Top Tutorials are Core Java,Hibernate ,Spring,Sturts.The content on R4R.in website is done by expert team not only with the help of books but along with the strong professional knowledge in all context like coding,designing, marketing,etc!