Civil%20Engineering/Airport%20Engineering%20MCQ Sample Test,Sample questions

Question:
According to ICAO, all markings on the runways are

1.red

2.black

3.white

4.yellow

Posted Date:-2022-09-22 11:42:15


Question:
All markings on the runway are

1.Black

2.Yellow

3.Red

4.White

Posted Date:-2022-09-22 11:06:28


Question:
As per ICAO recommendation, minimum width of safety area for instrumental runway should be

1.78 m

2.100 m

3.150 m

4.300 m

Posted Date:-2022-09-22 11:41:14


Question:
Covered area provided for servicing and repairs of aircraft is known as

1.Building area

2.Apron

3.Hanger

4.None of the above

Posted Date:-2022-09-22 11:25:40


Question:
For D and E type airports ICAO recommends that the sight distance at a height of 2.1 m should be at least

1.200 m

2.250 m

3.300 m

4.400 m

Posted Date:-2022-09-22 11:26:39


Question:
For supersonic jets, turning radius of taxiway required is a minimum of

1. 100 m

2.120 m

3.140 m

4.180 m

Posted Date:-2022-09-22 11:14:49


Question:
For supersonic transport aircraft, the minimum turning radius of taxiway is

1.60 m

2.100 m

3.120 m

4.180 m

Posted Date:-2022-09-22 11:43:07


Question:
In aprons aircraft are parked in

1.Angle nose out

2.Angle nose in

3.Angle nose in

4.Any of the above

Posted Date:-2022-09-22 11:22:23


Question:
In helicopters landing and take-off area should be marked as H with the size

1.2 to 3.5 m height and 3 to 4.5 m width

2. 3 to 4.5 m height and 2 to 3.5 m width

3.3 to 4.5 m height and 2 to 3.5 m width

4.2 to 3.5 m height and 1 to 2 m width

Posted Date:-2022-09-22 11:05:40


Question:
International Civil Aviation Organization (ICAO) was established in

1.1940

2.1944

3.1954

4.1964

Posted Date:-2022-09-22 11:37:45


Question:
Length of free area beyond runway in any port should be at least

1. 20 m

2.60 m

3.80 m

4.100 m

Posted Date:-2022-09-22 11:08:17


Question:
Length of STOL ports runway should be

1.400 m

2.500 m

3.600 m

4. 800 m

Posted Date:-2022-09-22 11:23:41


Question:
Required width for taxing in A and B type airports is

1.7.5 m

2.15.0 m

3.20.5 m

4.22.5 m

Posted Date:-2022-09-22 11:09:43


Question:
The capacity of parallel runway pattern depends upon

1. lateral spacing between two runways, weather conditions and navigational aids available

2.lateral spacing between two runaways and navigational aids available

3.lateral spacing between two runways and weather conditions

4.weather conditions and navigational aids available

Posted Date:-2022-09-22 11:31:11


Question:
The distance of check in point in a terminal from the road transportation should not be more than

1.20.5 m

2. 22.5 m

3.27.5 m

4.37.5 m

Posted Date:-2022-09-22 11:38:26


Question:
The landing area required for multi engine helicopters is

1. 22.5 x 22.5 m

2.30 x 60 m

3.60 x 120 m

4. 60 x 180 m

Posted Date:-2022-09-22 11:36:43


Question:
The main disadvantage of nose out parking pattern in apron is

1.overall apron area required is more

2.hot blast is directed towards the terminal building

3.rear loading door is far away from terminal building

4.All of the above

Posted Date:-2022-09-22 11:44:08


Question:
The periphery of landing and take-off area of heliports should be lighted with amber lights of medium intensity, spaced at

1.5 m

2.6 m

3.7.5 m

4.10 m

Posted Date:-2022-09-22 11:39:46


Question:
Which of the following is used for servicing and repairs of the aircraft?

1.holding apron

2.apron

3.hanger

4. terminal building

Posted Date:-2022-09-22 11:34:50


Question:
Wright brothers flew the first power driven plane in

1.1833

2.1853

3.1901

4.1903

Posted Date:-2022-09-22 10:57:54


More MCQS

  1. Irrigation Engineering MCQ
  2. Environmental Engineering MCQ
  3. Airport Engineering MCQ
  4. Highway Engineering MCQ
  5. Fluid Mechanics MCQ
  6. Building Construction MCQ
  7. Building Materials and Construction MCQ
  8. Civil Engineering Docks & Harbour Engineering MCQ
  9. Civil Engineering Surveying MCQ Questions
  10. Civil Engineering Design of Masonry Structures MCQ
  11. Building Materials MCQ
  12. Building Materials MCQ Questions
  13. Railway Engineering MCQ
  14. Tunnelling Civil Engineering MCQ
  15. Hydraulic Machines MCQ
  16. Engineering Mechanics MCQ
  17. R.C.C. Structure Designs MCQ
  18. Soil Mechanics & Foundation
  19. Strength of Materials MCQ
  20. Civil Engineering Steel Structures MCQ
  21. Applied Mechanics MCQ
  22. Structural Analysis MCQ
Search
R4R Team
R4Rin Top Tutorials are Core Java,Hibernate ,Spring,Sturts.The content on R4R.in website is done by expert team not only with the help of books but along with the strong professional knowledge in all context like coding,designing, marketing,etc!