Consider a circuit having resistance 10 kΩ, excited by voltage 5 V and an ideal switch S. If the switch is repeatedly closed for 2 ms and opened for 2 ms, the average value of i(t) is ____________
1.0.25 mA
2.0.35 mA
3.0.125 mA
4.1 mA
Posted Date:-2022-06-05 00:41:04
Poles or zeros lying on the jω axis must be?
1.complex
2.at least one complex pole
3. at least one complex zero
4.simple
Posted Date:-2022-06-03 11:38:52
The Thevenin’s equivalent of a network is a 10 V source in series with 2 Ω resistances. If a 3 Ω resistance is connected across the Thevenin’s equivalent is _____________
1.10 V in series with 1.2 Ω resistance
2.6 V in series with 1.2 Ω resistance
3.10 V in series with 5 Ω resistance
4.6 V in series with 5 Ω resistance
Posted Date:-2022-06-05 00:35:22
A 10 μF capacitor is charged from a 5 volt source through a resistance of 10 kΩ. The charging current offer 35 m sec. If the initial voltage on C is – 3 V is ___________
1.0.56 mA
2.5.6 mA
3.6 mA
4.5 μA
Posted Date:-2022-06-05 00:30:53
A 50 Hz current has an amplitude of 25 A. The rate of change of current at t = 0.005 after i = 0 and is increasing is ____________
1.2221.44 A/s
2.0
3.-2221.44 A/s
4. -3141.6 A/s
Posted Date:-2022-06-05 00:36:31
A function N (S) is said to have a pole (or zero) at infinity if the function N (1/S) has a pole (or zero) at S = ?
1.∞
2.2
3. 0
4.1
Posted Date:-2022-06-03 11:32:20
A network contains linear resistors and ideal voltage source S. If all the resistors are made twice their initial value, then voltage across each resistor is __________
1.Halved
2.Doubled
3.Increases by 2 times
4.Remains same
Posted Date:-2022-06-05 00:40:05
A network is said to be symmetrical if the relation between A and D is?
1.A = D
2.A = 2 D
3.A = 3 D
4.A = 4 D
Posted Date:-2022-06-05 00:18:03
A particular electric current is made up of two components a 10 A, a sine wave of peak value 14.14 A. The average value of electric current is __________
1.0
2. 24.14 A
3.10 A
4.14.14 A
Posted Date:-2022-06-05 00:41:39
A periodic voltage v (t) = 1 + 4 sin ωt + 2 cos ωt is applied across a 1Ω resistance. The power dissipated is ____________
1.1 W
2.11 W
3.21 W
4.24.5 W
Posted Date:-2022-06-05 00:25:23
A resistance and an inductance are connected in parallel and fed from 50 Hz ac mains. Each branch takes a current of 5 A. The current supplied by source is ____________
1.10 A
2.7.07 A
3.5 A
4.0 A
Posted Date:-2022-06-05 00:29:26
A triangular Pulse of 50 V peak is applied to a capacitor of 0.1 F. The change of the capacitor and its waveform shape is ___________
1.10 rectangular
2.5 rectangular
3.5 triangular
4.10 triangular
Posted Date:-2022-06-05 00:30:13
Barletts Bisection Theorem is applicable to ___________
1.Unsymmetrical networks
2.Symmetrical networks
3.Both unsymmetrical and symmetrical networks
4.Neither to unsymmetrical nor to symmetrical networks
Posted Date:-2022-06-05 00:34:36
Consider a circuit having resistances 16 Ω and 30 Ωis excited by a voltage V. A variable resistance R is connected across the 16 Ω resistance. The power dissipated in 30 Ω resistance will be maximum when value of R is __________
1.30 Ω
2. 16 Ω
3.9 Ω
4.0
Posted Date:-2022-06-05 00:37:54
Consider a cube having resistance R on each of its sides. For this non-planar graph, the number of independent loop equations are _______________
1.8
2.12
3.7
4.5
Posted Date:-2022-06-05 00:38:29
Consider a series RL circuit in which current 12 A is flowing through R and current 16 A is flowing through L. The current supplied by the sinusoidal current source I is ____________
1.28 A
2.4 A
3.20 A
4.Cannot be determined
Posted Date:-2022-06-05 00:37:07
Consider an RL series circuit having resistance R = 3 Ω, inductance L = 3 H and is excited by 6V. The current after a long time after closing of switch is ____________
1.1 A
2.2 A
3.0 A
4.Infinity
Posted Date:-2022-06-05 00:33:01
For a 2 port network, the transmission parameters are given as 10, 9, 11 and 10 corresponds to A, B, C and D. The correct statement among the following is?
1.Network satisfies both reciprocity and symmetry
2.Network satisfies only reciprocity
3.Network satisfies only symmetry
4.Network satisfies neither reciprocity nor symmetry
Posted Date:-2022-06-05 00:22:12
How many incandescent lamps connected in series would consume the same total power as a single 100 W/220 V incandescent lamp. The rating of each lamp is 200 W/220 V?
1.Not possible
2. 4
3.3
4. 2
Posted Date:-2022-06-05 00:19:33
If for a circuit the value of the h parameter is given as h = [8, 2/3; -2/3, 4/9]. Then the value of the voltage source V is _________________
1.2.38 V
2.1.19 V
3.1.6 V
4.3.2 V
Posted Date:-2022-06-05 00:23:32
If the diameter of a wire is doubled, the current carrying capacity of the wire is ___________
1.Half
2.Twice
3.Four times
4. One-fourth
Posted Date:-2022-06-05 00:32:29
If the number of poles (m) are greater than the number of zeros (n), then there will be _________ number of zeros at s = ∞.
1.m+n
2.m-n
3.m
4.n
Posted Date:-2022-06-03 11:26:41
If the number of zeros (n) are greater than the number of poles (m), then there will be _________ number of zeros at s = ∞.
1.n
2.m
3.n-m
4.n+m
Posted Date:-2022-06-03 11:26:10
If the poles or zeros are not repeated, then the function is said to be having __________ poles or ________ zeros.
1.simple, multiple
2.multiple, simple
3.simple, simple
4.multiple, multiple
Posted Date:-2022-06-03 11:24:57
If the poles or zeros are repeated, then the function is said to be having __________ poles or ________ zeros.
1.multiple, multiple
2.simple, simple
3.multiple, simple
4.simple, multiple
Posted Date:-2022-06-03 11:25:36
If the real part of driving point function is zero, then the pole and zero must be?
1.complex
2.simple
3.one complex pole
4.one complex zero
Posted Date:-2022-06-04 03:21:00
In a transfer function, the degree of numerator polynomial is ___________ than the degree of the denominator polynomial.
1.greater than
2.less than
3.equal to
4.less than or equal to
Posted Date:-2022-06-04 03:18:20
In the driving point admittance function, a pole of Y (s) means a _______ of V (S).
1. zero
2.1
3.2
4.3
Posted Date:-2022-06-03 11:37:43
In the driving point admittance function, a zero of Y (s) means a _______ of I (S).
1.1
2. 2
3.3
4.zero
Posted Date:-2022-06-03 11:37:10
Permeability is analogous to _____________
1.Conductivity
2.Resistivity
3.Retentivity
4.Coercivity
Posted Date:-2022-06-05 00:26:26
The coefficients of numerator polynomial and the denominator polynomial in a transfer function must be?
1.real
2. complex
3.at least one real coefficient
4.at least one complex coefficient
Posted Date:-2022-06-04 03:17:37
The driving point function is the ratio of polynomials in s. Polynomials are obtained from the __________ of the elements and their combinations.
1.transform voltage
2.transform current
3.transform impedance
4.transform admittance
Posted Date:-2022-06-03 11:31:06
The energy stored in a coil is 108 J. The power dissipated instantaneously across the blades of switch after it is opened in 10 ms is ____________
1.108 W
2. 1080 W
3.10800 W
4.108000 W
Posted Date:-2022-06-05 00:33:35
The N (S) becomes ________ when s is equal to any of the poles.
1.∞
2.0
3.1
4.2
Posted Date:-2022-06-03 11:24:29
The network function N (S) becomes _________ when s is equal to anyone of the zeros.
1.1
2.2
3.0
4.∞
Posted Date:-2022-06-03 11:24:02
The number of zeros including zeros at infinity is __________ the number of poles including poles at infinity.
1.greater than
2.equal to
3.less than
4.greater than or equal to
Posted Date:-2022-06-03 11:32:56
The pole is that finite value of S for which N (S) becomes __________
1.0
2.1
3.2
4.∞
Posted Date:-2022-06-03 11:31:48
The poles in the transfer function are denoted by?
1.x
2. y
3.z
4.w
Posted Date:-2022-06-03 11:23:27
The poles of driving point impedance are those frequencies corresponding to ___________ conditions.
1.short circuit
2.voltage source
3.open circuit
4.current source
Posted Date:-2022-06-03 11:33:30
The real part of all zeros and poles must be?
1.positive or zero
2.negative or zero
3. positive
4. negative
Posted Date:-2022-06-03 11:38:12
The real parts of all poles and zeros in a driving point function must be?
1.zero
2.negative
3.zero or negative
4.positive
Posted Date:-2022-06-04 03:19:03
The relation AD – BC = 1, (where A, B, C and D are the elements of a transmission matrix of a network) is valid for ___________
1.Both active and passive networks
2.Passive but not reciprocal networks
3.Active and reciprocal networks
4.Passive and reciprocal networks
Posted Date:-2022-06-05 00:21:30
The scale factor is denoted by the letter?
1.G
2.H
3.I
4.J
Posted Date:-2022-06-03 11:13:18
The short-circuit admittance matrix of a two port network is as follows. [0; -0.5; 0.5; 0] Then the 2 port network is ____________
1.Non-reciprocal and passive
2.Non-reciprocal and active
3.Reciprocal and passive
4.Reciprocal and active
Posted Date:-2022-06-05 00:16:06
The zeros in the transfer function are denoted by?
1.3
2.2
3.1
4. 0
Posted Date:-2022-06-03 11:22:50
The zeros of driving point impedance are those frequencies corresponding to ___________ conditions.
1.current source
2.open circuit
3.voltage source
4.short circuit
Posted Date:-2022-06-03 11:34:10
Two coils X and Y have self-inductances of 5 mH and 10 mH and mutual inductance of 3 mH. If the current in coils X change at a steady rate of 100 A/s, the emf induced in coil Y is ____________
1.0.3 V
2.0.5 V
3.1 V
4.1.5 V
Posted Date:-2022-06-05 00:35:54
Two networks are connected in series parallel connection. Then, the forward short-circuit current gain of the network is ____________
1.Product of Z-parameter matrices
2.Sum of h-parameter matrices
3.Sum of Z-parameter matrices
4. Product of h-parameter matrices
Posted Date:-2022-06-05 00:20:13
Two ports containing no sources in their branches are called?
1.active ports
2.passive ports
3. one port
4.three port
Posted Date:-2022-06-05 00:09:32
Two ports containing sources in their branches are called?
1.three port
2.one port
3.passive ports
4.active ports
Posted Date:-2022-06-05 00:11:33