A 110V voltmeter can measure a voltage of upto 110kV using a ___
1.110000/110V P.T.
2. 110000V P.T.
3.110V P.T.
4.110/110000V P.T.
Posted Date:-2022-05-03 08:38:00
C.T. and P.T. are used for ____
1.measuring low current and voltages
2.measuring very low current and voltages
3.measuring high currentsand voltages
4.measuring intermediate currents and voltages
Posted Date:-2022-05-03 08:31:09
Coils of a C.T. are separately wound.
1. True
2.False
3.all of the above
4.None of the mentioned
Posted Date:-2022-05-03 08:52:34
How are instrument transformers different from shunts and multipliers?
1. they are all the same
2.they have transformers
3.readings are independent of component values
4. they can be used for high voltages and currents
Posted Date:-2022-05-03 08:38:58
How can the meter circuit be isolated from the power circuit?
1. by grounding
2.through electrical isolation
3. by physical separation
4.through mechanical isolation
Posted Date:-2022-05-03 08:38:28
In a 1000/5 A C.T., the number of secondary turns would be ________
1.200
2.199 or 198
3.5
4.1000
Posted Date:-2022-05-03 08:56:24
In a shell type of core, the windings are ________
1. in the form of the shell
2.shorted with the primary windings
3.not wound
4.placed on the central limb
Posted Date:-2022-05-03 08:58:48
In the ring type of core, the secondary winding is ________
1.non-uniformly distributed over the core
2. shorted with the primary winding
3. uniformly distributed over the core
4.connected in the form of a ring
Posted Date:-2022-05-03 08:57:54
Instrument transformers can be easily replaced.
1. True
2. False
3.all of the above
4.None of the mentioned
Posted Date:-2022-05-03 08:35:58
What is the potential transformer?
1.transformer used with an D.C. ammeter
2. transformer used with an A.C. voltmeter
3. transformer used with an D.C. ammeter
4.transformer used with an A.C. voltmeter
Posted Date:-2022-05-03 08:30:15
A 5A ammeter can measure a current of upto 1000 A using a ______
1.5/1000A C.T.
2.1000A C.T.
3.5A C.T.
4.1000/5A C.T.
Posted Date:-2022-05-03 08:37:35
A multiplier is ______
1.non-inductive
2.resistive
3.capacitive
4.non-capacitive
Posted Date:-2022-05-03 08:27:24
A shunt can be used to measure large currents.
1.True
2.False
3.all of the above
4.None of the mentioned
Posted Date:-2022-05-03 08:22:52
A shunt is a ______
1.very high resistance
2. medium resistance
3. very low resistance
4. high resistance
Posted Date:-2022-05-03 08:22:10
At high voltages, the current transformers are enclosed in a tank.
1.True
2.False
3.all of the above
4.None of the mentioned
Posted Date:-2022-05-03 08:54:32
C.T. and P.T. are standardized at ____
1. 50 A and 220 V
2.25 mA and 2.2 kV
3.5 A and 110 V
4.75 nA and 1.1 MV
Posted Date:-2022-05-03 08:37:11
Current terminals have a small current capacity.
1.True
2.False
3.all of the above
4.None of the mentioned
Posted Date:-2022-05-03 08:23:27
Errors are introduced in Current Transformers.
1.True
2.False
3.all of the above
4.None of the mentioned
Posted Date:-2022-05-03 08:43:50
Errors in a C.T. can be minimised by _____
1.making use of laminations
2.having low reactance
3. increasing the secondary winding turns
4.decreasing the primary winding turns
Posted Date:-2022-05-03 08:45:57
For a C.T. the turns ratio is defined as the ______
1.n = Np ⁄ Ns
2.n = 1 ⁄ Np
3. n = Ns
4.n = Ns ⁄ Np
Posted Date:-2022-05-03 08:41:28
For a P.T. the turns ratio is defined as the ______
1.n = Np ⁄ Ns
2.n = 1 ⁄ Np
3.n = Ns
4.n = Ns ⁄ Np
Posted Date:-2022-05-03 08:43:06
In a C.T., the primary ampere turns is variable.
1.True
2.False
3.all of the above
4.None of the mentioned
Posted Date:-2022-05-03 09:02:03
In case of AC ammeters, shunts consist of _______
1. impedance
2.capacitance
3. resistance
4. inductance
Posted Date:-2022-05-03 08:25:33
In power measurements 180° phase shift is required.
1. True
2.False
3.all of the above
4.None of the mentioned
Posted Date:-2022-05-03 08:45:31
Instrument transformers give same readings irrespective of number of other instruments connected.
1. True
2.False
3.all of the above
4.None of the mentioned
Posted Date:-2022-05-03 08:36:41
Instrument transformers provide _____
1.electrical isolation from low rated winding
2.electrical isolation from high rated winding
3.electrical isolation from medium rated winding
4.no electrical isolation at all
Posted Date:-2022-05-03 08:36:24
Moving coil instruments have a current and voltage rating of _______
1.100 A and 25 V
2.50 mA and 50 mV
3.75 nA and 100 μV
4. 25 μA and 75 V
Posted Date:-2022-05-03 08:21:24
Mumetal has _______
1. low permeability, high loss
2.high permeability, medium loss
3.medium permeability, high loss
4.high permeability, low loss
Posted Date:-2022-05-03 08:59:25
Nominal ratio of an instrument transformer is defined as the _______
1.reciprocal of the rated primary value
2.ratio of rated secondary value to primary value
3.reciprocal of the rated secondary value
4.ratio of rated primary value to secondary value
Posted Date:-2022-05-03 08:40:19
Perminder has ______
1.medium saturation point of permeability
2.low saturation point of permeability
3.no saturation point of permeability
4.high saturation point of permeability
Posted Date:-2022-05-03 08:59:58
Phase angle error is due to _____
1.C.T.
2.magnetising component
3.iron loss
4. supply voltage
Posted Date:-2022-05-03 08:45:10
Potential terminals have a ______
1.high current capacity
2.low voltage capacity
3. low current capacity
4.high voltage capacity
Posted Date:-2022-05-03 08:24:24
Range of an electrical instrument depends on ______
1.current
2.voltage
3.power
4. resistance
Posted Date:-2022-05-03 08:20:36
Ratio correction factor is defined as ____
1.reciprocal of nominal ratio
2.ratio of nominal ratio to transformation ratio
3.ratio of transformation ratio to nominal ratio
4.reciprocal of transformation ratio
Posted Date:-2022-05-03 08:40:48
Ratio error is defined as ______
1.Ratio error = Kn⁄R
2. Ratio error = Kn – R⁄R
3. Ratio error = Kn – R
4.Ratio error = 1⁄R
Posted Date:-2022-05-03 08:44:20
Ratio error is due to ____
1.iron loss
2. C.T.
3.magnetising component
4.supply voltage
Posted Date:-2022-05-03 08:44:44
Secondary and primary windings consist of ______
1.copper turns
2.14 S.W.G copper wire and copper strip respectively
3. iron coils wound around
4.laminations
Posted Date:-2022-05-03 08:49:26
The primary winding of a C.T. has ____
1.a larger number of turns
2.no turns at all
3. intermediate number of turns
4.a few turns
Posted Date:-2022-05-03 08:31:51
The primary winding of a P.T. has _____
1. intermediate number of turns
2.no turns at all
3.a larger number of turns
4.a few turns
Posted Date:-2022-05-03 08:34:47
The secondary leakage reactance of a C.T. ______
1. increases its ratio error
2.decreases its ratio error
3.has no effect on its ratio error
4.increases the impedance of the circuit
Posted Date:-2022-05-03 08:48:49
The secondary winding of a C.T. has ______
1.a large number of turns
2.a few turns
3. no turns at all
4.intermediate number of turns
Posted Date:-2022-05-03 08:32:41
The secondary winding of a P.T. has _______
1. a large number of turns
2. intermediate number of turns
3. no turns at all
4.a few turns
Posted Date:-2022-05-03 08:35:16
The windings of a C.T. are _______
1.tied together
2.shorted
3.wound over one another
4.grounded
Posted Date:-2022-05-03 08:54:12
Transformation ratio of an instrument is defined as _______
1. ratio of primary to secondary phasor
2.ratio of secondary to primary phasor
3.reciprocal of the primary phasor
4.reciprocal of the secondary phasor
Posted Date:-2022-05-03 08:39:49
Turns compensation is used to obtain ____
1.to compensate the turns
2. to equalise the turns on the windings
3. to protect the equipment
4.transformation ratio equal to nominal ratio
Posted Date:-2022-05-03 08:55:30
Turns ration for a C.T. is _______
1.n = Np ⁄ Ns
2.n = Ns ⁄ Np
3.n = 1 ⁄ Np
4.n = Ns
Posted Date:-2022-05-03 08:34:23
What is the condition for using a multiplier in A.C. voltmeters?
1. by using ac supply
2.by maintaining a uniform impedance
3.by maintaining a uniform frequency
4.by using a galvanometer
Posted Date:-2022-05-03 08:28:16
What is the current transformer?
1. transformer used with an A.C. ammeter
2.transformer used with an D.C. ammeter
3.transformer used with an A.C. voltmeter
4.transformer used with an D.C. voltmeter
Posted Date:-2022-05-03 08:29:18
What is the effect of reducing the secondary turns in a C.T. by 1%?
1. transformation ratio reduces by the same value
2.no effect
3.nominal ratio increase by the same value
4.secondary current increases by the same value
Posted Date:-2022-05-03 08:55:57
What is the effect of the ammeter range on the shunt resistance?
1.no effect
2.varies by a factor of multiplying factor
3.varies by a factor of the resistance
4.varies by a factor of unity
Posted Date:-2022-05-03 08:26:32