Engineering/Chemical Engineering Mcq Question Set 9 Sample Test,Sample questions

Question:
 For the parallel reaction, A→B and A→C, if B is the desired product and the reaction A→B is of positive order n1 and C is the undesired product and the reaction A→C is of negative order n2, then increasing the concentration of A _____

1.Decreases desired product selectivity

2. Increases desired product selectivity

3. Initially increases and then decreases desired product selectivity

4. Does not affect desired product selectivity

Posted Date:-2022-03-14 15:15:34


Question:
 For very low conversion, the value of Damkohler number is ____

1. ≤0.1

2.>10

3. ≥0.1

4.= 10

Posted Date:-2022-03-14 14:53:01


Question:
 In terms of conversion, half life is the time taken for ____

1.50% conversion

2.75% conversion

3.20% conversion

4. 30% conversion

Posted Date:-2022-03-14 14:55:04


Question:
 Langmuir Hinshelwood kinetics is followed by the reaction:

1. Formation of hydrogen bromide

2.Vapor phase decomposition of ethanal

3. Cis-trans isomerization

4. Reversible catalytic decomposition of isopropylbenzene

Posted Date:-2022-03-14 14:10:50


Question:
 Selectivity in parallel reactions is defined as the ratio of___

1. Moles of desired product formed to the moles of undesired material formed

2.Moles of undesired product formed to the moles of desired material formed

3.Moles of product formed to the moles of reactant consumed

4.Moles of reactant consumed to the moles of product formed

Posted Date:-2022-03-14 15:13:59


Question:
 State true or false.
A variable volume reactor is the one in which the reaction proceeds by a change in number of moles at a given pressure and temperature.

1.True

2.False

3.all of the above

4.None of the mentioned

Posted Date:-2022-03-14 14:15:16


Question:
 State true or false.
Autocatalytic reactions are single order reactions.

1.True

2.False

3.all of the above

4.None of the mentioned

Posted Date:-2022-03-14 15:09:02


Question:
 The mlecularity of the following single step reaction is ____
aA + bB → pP

1.a+b-p

2.a+b+p

3. a+b

4. a-p

Posted Date:-2022-03-14 14:06:17


Question:
 The reaction yield is defined as the ratio of ____

1.Moles of reactant reacted to the moles of product formed

2.Moles of product formed to the moles of reactant reacted

3.Moles of desired product formed to the moles of undesired material formed

4. Moles of product formed to the moles of reactant fed

Posted Date:-2022-03-14 15:14:46


Question:
 What is the mole balance of a component in a CSTR? (Where F0 is the molar flowrate of reactant entering and F is the exit molar flowrate)

1.F0 = FX + F

2.F0 = FX + F0

3.F0 = F0X + F

4. F0 = X + F

Posted Date:-2022-03-14 14:20:14


Question:
 Which of the following reactions follows elementary rate law?

1.Formation of hydrogen bromide

2.Vapor phase decomposition of ethanal

3. Cis-trans isomerization

4.Reversible catalytic decomposition of isopropylbenzene

Posted Date:-2022-03-14 14:10:18


Question:
An example of autocatalytic reaction is ____

1. Ammonia formation reaction

2. Hydrogen peroxide decomposition reaction

3. Reaction of permanganate with oxalic acid

4.Oxidation of copper

Posted Date:-2022-03-14 15:09:53


Question:
Arrhenius first suggested the temperature dependence of the rate constant.

1. True

2. False

3.all of the above

4.None of the mentioned

Posted Date:-2022-03-14 13:52:58


Question:
Autocatalytic reactions are the ones in which ____

1.One of the products poisons the catalyst

2.There is no catalyst employed

3. Only one reactant is involved

4.One of the products catalyses the reaction

Posted Date:-2022-03-14 15:08:19


Question:
For a zero order reaction, the slope of t0.5 and CAo is ____

1. 2

2.3

3. 1

4. 0

Posted Date:-2022-03-14 14:56:34


Question:
For all orders of reaction except the first order, half life is related to initial concentration as ____

1.t0.5 α CAon

2. t0.5 α CAo1-n

3. t0.5 α CAo2n

4.t0.5 α CAo

Posted Date:-2022-03-14 14:55:38


Question:
For the parallel reaction, A→B of order n1 and A→C of order n2, if B is the desired product, then which of the following reactor/ combination of reactors is used if n1 > n2?

1.CSTR

2. CSTR followed by Bubbling bed reactor

3.PFR

4.CSTR followed by PFR

Posted Date:-2022-03-14 15:16:06


Question:
For the parallel reaction, A→B, represented as (-rA) = k1CA5 and A→C represented as (-rA) = k2CA3, theideal reactor preferred is ____

1.CSTR

2.CSTRs in parallel

3.CSTRs in series

4.PFR

Posted Date:-2022-03-14 15:16:57


Question:
For the reaction A → 2R containing 50% moles initially, the value of εA is ____

1.1

2.0.75

3.0.5

4. 0.9

Posted Date:-2022-03-14 14:16:43


Question:
For the reaction A → 4R, the value of εA is ____

1. -3

2. 3

3.4

4.2

Posted Date:-2022-03-14 14:16:01


Question:
Hydrogenation of oil is an example of ___________ reactor

1.Homogeneous

2. Heterogeneous

3.Autocatalytic

4.Insufficient data

Posted Date:-2022-03-14 13:52:39


Question:
If t0.5 = 100 minutes and initial concentration is 10, then the order of the reaction is ____

1.4

2. -1

3.-2

4.1

Posted Date:-2022-03-14 14:57:28


Question:
If the reactions A→B and A→C are represented as (-rA) = k1CA3 and (-rA) = k2CA6 of activation energies 130 and 150 J/ mol, then which of the following is the right selection of process parameters to increase selectivity of B?

1. CSTR, High temperature

2.PFR, High temperature

3.CSTR, Low temperature

4.PFR, Low temperature

Posted Date:-2022-03-14 15:36:38


Question:
If the total pressure for reaction is initially is 2 atm and the pressure is changed to 3 atm for the reaction to occur, then the value of (PA – PA0) for the reaction N2O → N2 + 0.5O2 is ____

1. -2

2.2

3.-1

4. 1

Posted Date:-2022-03-14 14:09:00


Question:
Molecularity is _____value and order is ______ value.

1.an integer, a fractional

2.a fractional, an integer

3.both fractional

4. both integers

Posted Date:-2022-03-14 14:02:34


Question:
Molecularity refers to an elementary reaction.

1.True

2.False

3.all of the above

4.None of the mentioned

Posted Date:-2022-03-14 13:57:24


Question:
Reaction corresponding to stoichiometric equation is called ______

1.Non-elementary

2.Elementary

3. Heterogeneous

4.Homogeneous

Posted Date:-2022-03-14 14:05:21


Question:
State true or false.
An autocatalytic reaction is represented as A + R → R + R where, A is a reactant and R formed as the product catalyses the reaction.

1. True

2.False

3.all of the above

4.None of the mentioned

Posted Date:-2022-03-14 15:08:43


Question:
State true or false.
Constant volume system means that the volume of reactor is constant.

1.True

2. False

3.all of the above

4.None of the mentioned

Posted Date:-2022-03-14 14:07:12


Question:
State true or false.
For a second order reaction, t.0.5 is directly proportional to the initial concentration.

1.True

2.False

3.all of the above

4.None of the mentioned

Posted Date:-2022-03-14 14:54:25


Question:
State true or false.
For different sized CSTRs in series, the best system is the one having a minimum volume for a specific conversion.

1. True

2.False

3.all of the above

4.None of the mentioned

Posted Date:-2022-03-14 14:53:37


Question:
State true or false.
It is preferable to use a number of CSTRs in series to achieve a specific conversion than a single CSTR.

1.True

2. False

3.all of the above

4.None of the mentioned

Posted Date:-2022-03-14 14:17:53


Question:
The autocatalyst in microbial fermentation reactions is:

1.Organic feed

2.Microbes

3. Enzyme

4. Product chemical

Posted Date:-2022-03-14 15:11:17


Question:
The overall order of reaction for –rA = kCA0.7CB1.3 is _______

1.0

2. 1

3. 2

4. 3

Posted Date:-2022-03-14 14:03:02


Question:
The overall reaction order for A + B → C + D is two. It implies that ______

1.reaction may be non-elementary and molecularity is two

2. reaction may be elementary and molecularity is two

3. reaction is non-elementary and molecularity is two

4. reaction is elementary and molecularity is two

Posted Date:-2022-03-14 14:04:50


Question:
The rate constant for a first order reaction depends on _____

1.Pressure

2. Temperature

3.Concentration

4. Time

Posted Date:-2022-03-14 14:05:46


Question:
The reaction H2 + Br2 → 2HBr proceeds via which mechanism?

1. Free-radical

2.Ionic substitution

3.Elimination

4. Pericyclic

Posted Date:-2022-03-14 14:11:55


Question:
The reaction rate of a bimolecular reaction at 300K is 10 times the reaction rate at 150K. Calculate the activation energy using collision theory.

1. 4928 J/mol

2.5164 J/mol

3.3281 J/mol

4. 1296 J/mol

Posted Date:-2022-03-14 13:55:00


Question:
The slope of the line in the graph gives the _____

1. Activation energy

2.Rate constant

3. Frequency factor

4. Insufficient data

Posted Date:-2022-03-14 13:53:58


Question:
The units of rate constant of nth order is ______

1. time-1

2. concentration(n-1)

3. time-1 concentration(1-n)

4. time-1 concentration(n-1)

Posted Date:-2022-03-14 14:04:22


Question:
Value of m to obtain the collision theory relation for temperature dependency of rate constant is _____

1.1

2. 0

3. -1

4. 0.5

Posted Date:-2022-03-14 13:54:31


Question:
What is the relative rate of reaction for the given reaction.
2A + 9B → 7C + 4D

1.–rA = -9rB=7rC=–4rD

2.–rA =-rB/9=rC/7=rD/4

3.–rA =-rB/9=7rC=4rD

4.–rA = 9rB=-7rC=–4rD

Posted Date:-2022-03-14 14:03:49


Question:
What is the slope of the plot of ln (t0.5) and ln (CAo)? (Where n is the reaction order)

1.1-n

2.2-n

3. n

4. n2

Posted Date:-2022-03-14 14:57:02


Question:
Which of the following constants is a type of equilibrium constant?

1.Dissociation constant

2.Association constant

3.Solubility

4.Decay constant

Posted Date:-2022-03-14 13:56:45


Question:
Which of the following does not hold true for gas-solid catalyzed reactions?

1.Rate law is preferably written in terms of partial pressures

2.Rate law is preferably written in terms of concentrations

3.Rate law can be written only in terms of partial pressures

4.Rate law can be written only in terms of concentrations

Posted Date:-2022-03-14 14:12:51


Question:
Which of the following is true for fluidized catalytic beds?

1.They cannot be used for multi-phase chemical reactions

2. The bulk density is a function of the flow rate through the bed

3. They come under the category of batch reactors

4. There is no pressure drop

Posted Date:-2022-03-14 14:11:33


Question:
Which of the following is true for the rate law of a reversible reaction?

1.It reduces to irreversible form when product concentration is zero

2.It satisfies thermodynamic relationships at all times

3.Rate law can be written only in terms of partial pressures

4. Rate law can be written only in terms of concentrations

Posted Date:-2022-03-14 13:56:21


Question:
Which of the following reactors is used for carrying out autocatalytic reactions?

1.CSTR

2.PFR

3.Batch reactor

4. A combination of CSTR and PFR.

Posted Date:-2022-03-14 15:10:42


Question:
Which of the following represents constant volume system?

1.C + O2 → CO2

2.CO + H2O → CO2 + H2

3.N2 + 3H2 → 2NH3

4.SO2 + 0.5O2 → SO3

Posted Date:-2022-03-14 14:08:16


Question:
Which theory is the basis for Arrhenius equation?

1.Collision theory

2.Kinetic theory of gases

3.Ideal gas law

4. Charles and Boyles law

Posted Date:-2022-03-14 13:55:24


More MCQS

  1. Civil Engineering MCQS -Building Materials Section 1
  2. Civil Engineering MCQS -Building Materials Section 2
  3. Civil Engineering MCQS -Building Materials Section 3
  4. Civil Engineering MCQS -Building Materials Section 4
  5. Mechanical Engineering Engineering MCQS -Mechanics Section-1
  6. Mechanical Engineering Engineering MCQS -Mechanics Section-2
  7. Civil Engineering MCQS -Building Materials Section 5
  8. Civil Engineering MCQS -Building Materials Section 6
  9. Civil Engineering MCQS -Building Materials Section 7
  10. Civil Engineering MCQS -Building Materials Section 8
  11. Civil Engineering MCQS-Surveying Section 1
  12. Civil Engineering MCQS-Surveying Section 2
  13. Civil Engineering MCQS-Surveying Section 3
  14. Civil Engineering MCQS-Surveying Section 4
  15. Civil Engineering MCQS-Surveying Section 5
  16. Civil Engineering MCQS-Surveying Section 6
  17. Civil Engineering MCQS-Surveying Section 7
  18. Civil Engineering MCQS-Surveying Section 8
  19. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 1
  20. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 2
  21. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 3
  22. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 4
  23. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 5
  24. Civil Engineering (MCQS) Soil Mechanics and Foundation Engineering SET 6
  25. Civil Engineering [MCQS] Applied Mechanics Section -1
  26. Civil Engineering [MCQS] Applied Mechanics Section -2
  27. Civil Engineering [MCQS] Applied Mechanics Section -3
  28. Civil Engineering [MCQS] Applied Mechanics Section -4
  29. Civil Engineering [MCQS] Applied Mechanics Section -5
  30. Civil Engineering -MCQS-Hydraulics Section 1
  31. Civil Engineering -MCQS-Hydraulics Section 2
  32. Civil Engineering -MCQS-Hydraulics Section 3
  33. Civil Engineering -MCQS-Hydraulics Section 4
  34. Civil Engineering -MCQS-Hydraulics Section 5
  35. Civil Engineering -MCQS-Hydraulics Section 6
  36. Civil Engineering -MCQS-Waste Water Engineering - Section 1
  37. Civil Engineering -MCQS-Waste Water Engineering - Section 2
  38. Civil Engineering -MCQS-Waste Water Engineering - Section 3
  39. Civil -MCQ RCC Structures Design - Section 1
  40. Civil -MCQ RCC Structures Design - Section 2
  41. Civil -MCQ RCC Structures Design - Section 3
  42. Engineering Electrical Engineering Dc Motors part1
  43. Engineering Electrical Engineering Dc Motors part 2
  44. Engineering Electrical Engineering Dc Motors part3
  45. Electric Drives MCQ Questions and Answers
  46. Automobile Engineering MCQ Set 01
  47. Automobile Engineering MCQ Set 02
  48. Automobile Engineering MCQ Set 03
  49. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 01
  50. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 02
  51. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 03
  52. Compressors, Gas Turbines and Jet Engines MCQ Practice Test - Set 04
  53. Machine Design Mcq set 01
  54. Machine Design Mcq set 02
  55. Machine Design Mcq set 3
  56. Mechanical Engineering Design MCQ SET 03
  57. Mechanical Engineering Design MCQ SET 04
  58. Advanced Surveying mcq set 1
  59. Automobile Engineering MCQ
  60. Basic Civil Engineering Mcq
  61. Microwave Engineering Mcq Set 1
  62. Microwave Engineering Mcq Set 2
  63. Microwave Engineering Mcq Set 3
  64. Mechanical Engineering Basic Mcq Questions Set 1
  65. Mechanical Engineering Basic Mcq Questions Set 2
  66. Basic Chemical Engineering MCQ
  67. Chemical Engineering MCQ Question Set 1
  68. Chemical Engineering Mcq Question Set 2
  69. Chemical Engineering Mcq Question Set 3
  70. Chemical Engineering Mcq Question Set 4
  71. Chemical Engineering Mcq Question Set 5
  72. Chemical Engineering Mcq Question Set 6
  73. Chemical Engineering Mcq Question Set 7
  74. Chemical Engineering Mcq Question Set 8
  75. Civil Engineering Basic Set 1
  76. Chemical Engineering Mcq Question Set 9
  77. Chemical Engineering Mcq Question Set 10
  78. Civil Engineering Basic Set 2
  79. Chemical Engineering Mcq Question Set 11
  80. Chemical Engineering Mcq Question Set 12
  81. Engineering Electrical Engineering
  82. Chemical Engineering Mcq Question Set 14
  83. Chemical Engineering Mcq Question Set 15
  84. Chemical Engineering Mcq Question Set 16
  85. Chemical Engineering Mcq Question Set 17
  86. Engineering Electronics & Communication Engineering
  87. Engineering Computer Science & Engineering
  88. Computer Science & Engineering Computer Networks Mcq
  89. Environmental Engineering MCQ
  90. Microwave Engineering ECE Mcq
  91. Electrical Engineering Mcq
  92. Engineering Branch Wise MCQs
  93. Software Engineering Multiple Choice Questions
  94. Traffic Engineering MCQ
  95. Highway Engineering MCQs
  96. Engineering Thermodynamics MCQs
  97. Materials and Processes -Notch Toughness
  98. Software Engineering Multiple Choice Question Set 1
  99. Software Engineering Multiple Choice Question Set 2
  100. Software Engineering Multiple Choice Question Set 3
  101. Software Engineering Multiple Choice Question Set 4
  102. Hydraulic Machines MCQs Set-1
  103. Hydraulic Machines MCQs Set-2
  104. Hydraulic Machines MCQs Set-3
  105. Hydraulic Machines MCQs Set-4
Search
R4R Team
R4Rin Top Tutorials are Core Java,Hibernate ,Spring,Sturts.The content on R4R.in website is done by expert team not only with the help of books but along with the strong professional knowledge in all context like coding,designing, marketing,etc!