IIT JEE/IIT JEE Redox Reactions And Electrochemistry Sample Test,Sample questions

Question:
.A certain current liberated 0.504 g of hydrogen in 2 hours. How many grams of copper can be liberated by the same current flowing for the same time in a copper sulphate solution?



22.9 g

1.63.5 g

2.31.8 g

3.22.9 g

4.55.8 g

Posted Date:-2021-10-04 18:30:23


Question:
.Amount of chlorine liberated while passing 0.5 faraday of electricity through NaCl solution is



1.63 g

2.17.75 g

3.35.5 g

4.8.25 g

Posted Date:-2021-10-04 18:30:23


Question:
.Aqueous solution of HCl conducts electricity because it




1.dissociates

2.dimerises

3.ionises

4.forms hydrogen bond

Posted Date:-2021-10-04 18:30:23


Question:
.At infinite dilution of an electrolyte, the equivalent conductance of cations and anions are




1.dependent on the nature of solvent

2.independent of nature of ions

3.independent of each other

4.dependent on each other

Posted Date:-2021-10-04 18:30:23


Question:
.During discharge in the case of lead storage batteries density of sulphuric acid

increases


remains constant

1.increases

2.decreases

3.may decrease or increase

4.remains constant

Posted Date:-2021-10-04 18:30:23


Question:
.During the electrolysis of fused sodium chloride, the anodic reaction is




1.reduction of chloride ions

2.oxidation of sodium ions

3.oxidation of chloride ions

4.None of the above

Posted Date:-2021-10-04 18:30:23


Question:
.Electrolytes when dissolved in water dissociate into their constituent ions. The degree of dissociation of an electrolyte increase with the




1.decreasing concentration of the electrolyte

2.increasing concentration of the electrolyte

3.presence of a common constituent

4.decreasing temperature

Posted Date:-2021-10-04 18:30:23


Question:
.For reducing 1 mole of ferrous ions to iron the number of faradays of electricity required will be




1.4

2.1.5

3.0.5

4.1

Posted Date:-2021-10-04 18:30:23


Question:
.Hydroxide ions are discharged in reference to chloride ions when?.is electrolysed.

1.NaCl

2.solid NaCl

3.dil. NaCl

4.conc. NaCl

Posted Date:-2021-10-04 18:30:23


Question:
.In an electrochemical cell, electrical energy




1.may be absorbed or released

2.neither supplied nor released

3.has to be supplied

4.is released

Posted Date:-2021-10-04 18:30:23


Question:
.In electrolysis, one mole of aluminium atoms is deposited by




1.five moles of electrons

2.three moles of electrons

3.two moles of electrons

4.one mole of electrons

Posted Date:-2021-10-04 18:30:23


Question:
.On passing electricity through dil sulphuric acid the amounts of substance liberated at the cathode and anode are in the ratio




1.2:03

2.3:02

3.8:01

4.1:08

Posted Date:-2021-10-04 18:30:23


Question:
.On passing one faraday of electricity through molten lead (II) bromide, amount of bromine obtained is




1 gm equivalent

1.5 gm mole

2.5 gm mole

3.3 mole

4.1 mole gm atom

Posted Date:-2021-10-04 18:30:23


Question:
.Passing 96.5 coulombs of charge through molten NaOH will deposit




1.0.046 g

2.0.023 g

3.230 g

4.46 g

Posted Date:-2021-10-04 18:30:23


Question:
.The amount of electricity that can deposit 108 g of silver

1.1 amp.

2.1 coulomb

3.1 Faraday

4.2 amp.

Posted Date:-2021-10-04 18:30:23


Question:
.The chemical reaction taking place at anode is




1.halogenation

2.oxidation

3.ionisation

4.reduction

Posted Date:-2021-10-04 18:30:23


Question:
.The conduction of electricity through the electrolyte solution is due to




1.movement of molecules of electrolyte

2.movement of ions of electrolyte

3.movement of separate atoms

4.movement of particles of the solvent.

Posted Date:-2021-10-04 18:30:23


Question:
.The electrode by which electrons enter the electrolyte may be




1.cathode

2.conductor

3.anode

4.anode or cathode

Posted Date:-2021-10-04 18:30:23


Question:
.The most reactive metals among the following is

Mg


1.Mg

2.Rb

3.Al

4.Na

Posted Date:-2021-10-04 18:30:23


Question:
.The quantity of an ion discharged during electrolysis is directly proportional to




1.chemical equivalent of the ion

2.time of flow of current

3.current strength

4.All the above

Posted Date:-2021-10-04 18:30:23


Question:
.The units of electrochemical equivalent is




1.gram/second

2.gram/coulomb

3.gram/cm

4.gram/volt

Posted Date:-2021-10-04 18:30:23


Question:
.Two electrolytic cell contain 0.1 M ferrous sulphate and 0.2 M ferric chloride respectively are subjected to electrolysis, the ratio of iron deposited in the two cells is




1.1:01

2.2:01

3.3:01

4.3:02

Posted Date:-2021-10-04 18:30:23


Question:
.Which of the following does not give conducting solution is water?




1.Potash alum

2.Ethyl alcohol

3.Vitriol

4.Methyl Alcohal

Posted Date:-2021-10-04 18:30:23


Question:
.Which of the following is not a good conductor?




1.Silver

2.Solid NaCl

3.Fused NaCl

4.Aqueous solution of NaCl

Posted Date:-2021-10-04 18:30:23


Question:
.Which of the following is the best reducing agent in aqueous solution?

1.Li

2.Cs

3.Rb

4.K

Posted Date:-2021-10-04 18:30:23


Question:
A bulb draws a current of 4.0 ampere, the charge in coulombs used by the bulb in 30 seconds is




1.60 C

2.120 C

3.15 C

4.7.5 C.

Posted Date:-2021-10-04 18:30:23


Question:
A certain quantity of current i amp was passed through three electrolytic cells P, Q, R connected in series and containing aqueous solutions of silver nitrate, mercuric nitrate and mer-curous nitrate respectively. It resulted in the deposition of0.216 g of Ag. The masses of Hg deposited in cell Q andR respectively (At. = 108; Hg = 200.6)




1.0.4012 g, 0.9042 g

2.0.4012 g, 0.2006 g

3.0.2006 g, 0.4012 g

4.0.1003 g, 0.2006 g.

Posted Date:-2021-10-04 18:30:23


Question:
An ampere is the rate of flow of electric current of:




1.one coulomb per second

2.one faraday per minute

3.one coulomb per minute

4.one faraday per second

Posted Date:-2021-10-04 18:30:23


Question:
An electrochemical cell can be changed into an electrolytic cell by




1.changing the electrolytes in two half cells

2.changing the conc. of the electrolytes

3.providing higher potential from outside

4.reversing the electrodes

Posted Date:-2021-10-04 18:30:23


Question:
Art of electroplating was enunciated by


Brugantally

1.Einstein

2.Brugantally

3.Ampere

4.Kohlorausch

Posted Date:-2021-10-04 18:30:23


Question:
Certain quantity of current librated 0.504 g of hydrogen in 2 hr. The number of grams of copper that can be librated by same current under similar conditions will be approximately




1.12.7 g

2.16.0 g

3.31.8 g

4.63.5 g.

Posted Date:-2021-10-04 18:30:23


Question:
During the electrolysis of water 4 mol of electrons were transferred from anode to cathode. The total volume of the gases produced at STP will be approximately



1.67.2 L

2.22.4 L

3.44.8 L

4.89.4 L.

Posted Date:-2021-10-04 18:30:23


Question:
Electrochemical equivalent is the mass of the element liberated during electrolysis when




1.2 faraday electricity is passed

2.1 amp. current for 1 hrs is passed

3.1 coulomb electricity is passed

4.3 amp current is passed

Posted Date:-2021-10-04 18:30:23


Question:
If mercury is used at cathode during the electrolysis of aqueous NaCl the ions discharged at the cathode are




1.hydroxide

2.chloride

3.sodium

4.none of these

Posted Date:-2021-10-04 18:30:23


Question:
If the specific conductance and conductance of a solution are the same, then the cell constant is



8

1.25

2.10

3.8

4.9

Posted Date:-2021-10-04 18:30:23


Question:
In a galvanic cell, which one of the following statements is incorrect?




1.Reduction takes place at the anode

2.Reduction takes place at the cathode

3.Cathode is positively charged

4.Anode is negatively charged

Posted Date:-2021-10-04 18:30:23


Question:
In the concentration cells the electrical energy is due to




1.transfer of a substance from one solution to another solution

2.temperature

3.reduction of fuel

4.chemical action

Posted Date:-2021-10-04 18:30:23


Question:
It is impossible to measure the actual voltage of any half cell by itself because




1.of resistance of wire

2.electrical neutrality is maintained

3.a reaction does not take place of its own

4.both half cell reactions occur simultaneously

Posted Date:-2021-10-04 18:30:23


Question:
More electropositive elements have more



1. negative reduction potential

2.positive oxidation potential

3.tendency to loose electrons

4.positive reduction potential

Posted Date:-2021-10-04 18:30:23


Question:
One mole of electrons is same as

faraday


1.faraday

2.coulomb

3.ampere

4.none of these

Posted Date:-2021-10-04 18:30:23


Question:
Point out the correct statement in a cell of zinc and copper:




1.Zinc acts as anode and copper as cathode

2.The E of zinc is more than that of copper

3.The flow of electrons is from copper to zinc

4.Zinc acts as cathode and copper as anode

Posted Date:-2021-10-04 18:30:23


Question:
Salt Bridge is used because it




1.forms insoluble precipitates with the electrolytes in the two half cells

2.enhances the flow of electrons by overcoming liquid junction potential

3.maintains the electrical neutrality of the two half cells

4.provides the extra ions

Posted Date:-2021-10-04 18:30:23


Question:
Substances that dissociate and conduct electricity in aqueous solutions are




conductors

1.emulsios

2.colloidal solution

3.electrolytes

4.conductors

Posted Date:-2021-10-04 18:30:23


Question:
The conductivity of strong electrolyte

increase on dilution slightly


1.increase on dilution slightly

2.does not change on dilution

3.decreases on dilution

4.depends on density of electrolyte itself.

Posted Date:-2021-10-04 18:30:23


Question:
The decomposition of an electrolyte by passing electric current depends upon




1.energy of electrolysis

2.quantity of current which is passed

3.shape of the electrode

4.size of the container

Posted Date:-2021-10-04 18:30:23


Question:
The equivalent conductivity of a weak electrolyte

 

1.increases rapidly with dilution but does not reach a

2.constant value even at infinite dilution

3.reaches a maximum constant value at infinite dilution

4.is a constant and does not change with dilution

Posted Date:-2021-10-04 18:30:23


Question:
The most important condition for a galvanic cell is



1.the two half cells should be connected internally by some device

2.the electrolytes should taken in a separate container

3.the electrolytes should not have physical contact

4.the electrodes should be inert

Posted Date:-2021-10-04 18:30:23


Question:
Voltaic cell stops functioning after sometimes because there is




increase in oxidation potential and decrease in reduction potential

1.the decrease in oxidation potential outweigh the increase in reduction potential

2.the decrease in oxidation potential value equalises the increase in reduction potential value

3.decrease in oxidation potential value

4.increase in oxidation potential and decrease in reduction potential

Posted Date:-2021-10-04 18:30:23


Question:
When electricity is passed to aqueous solution of aluminium chloride, 13.5 g of Al are deposited. The number of Faradys of electricity passed must be




1.2

2.1.5

3.1

4.0.5

Posted Date:-2021-10-04 18:30:23


Question:
Which of the following metals when coupled will give maximum e.m.f. for a voltaic cell.




1.Pb and Sn

2.Cu and Ag

3.Ca and Cu

4.Fe and Cu

Posted Date:-2021-10-04 18:30:23


More MCQS

  1. IIT JEE Heat And Thermodynamics
  2. IIT JEE PHYSICS Current Electricity
  3. IIT JEE Fluids At Rest
  4. IIT JEE Description Of Motion In One Dimension part1
  5. IIT JEE Magnetic Effect Of Current And Magnetism
  6. IIT JEE Principles Of Communication set-1
  7. IIT JEE Principles Of Communication set-2
  8. IIT JEE Description Of Motion In One Dimension part2
  9. IIT JEE Electromagnetic Induction Electromagnetic Waves Part-1
  10. IIT JEE Circular Motion Centre Of Mass
  11. IIT JEE Elasticity
  12. IIT JEE Motion In Two And Three Dimensions part1
  13. IIT JEE Electromagnetic Induction Electromagnetic Waves Part 2
  14. Electrons And Dual Nature Of Matter And Radiations
  15. IIT Chemistry Of Lighter Metals
  16. IIT JEE Gravitation part1
  17. IIT JEE Gravitation part 2
  18. IIT JEE Laws Of Motion
  19. IIT JEE Alcohols And Phenols
  20. IIT JEE CHEMISTRY Biomolecules And Biological Processes
  21. IIT JEE CHEMISTRY Chemical Bonding And Molecular Structure Part-1
  22. IIT JEE Gaseous State
  23. IIT JEE Organic Compounds Containing Halogens
  24. IIT JEE Qualitative Inorganic Analysis
  25. IIT JEE Solid State
  26. IIT JEE Atoms Molecules And Chemical Arithmetic
  27. IIT JEE Aldehydes And Ketones
  28. IIT JEE Chemistry Of Non Metals
  29. IIT JEE Chemistry Of Heavier Metals
  30. IIT JEE Isomerism And Stereochemistry
  31. IIT JEE Organic Compounds Containing Nitrogen
  32. IIT JEE Environmental Chemistry set 1
  33. IIT JEE Chemical Energetics And Thermodynamics
  34. IIT JEE CHEMISTRY Chemical Bonding And Molecular Structure Part-2
  35. IIT JEE Environmental Chemistry set 2
  36. IIT JEE Solutions Mcq Questions Part-1
  37. IIT JEE Synthetic And Natural Polymers Part 1
  38. IIT JEE Synthetic And Natural Polymers Part 2
  39. IIT JEE Transition Metals Including Lanthanides
  40. IIT JEE Atomic Structure
  41. IIT JEE Solutions Mcq Questions part 2
  42. IIT JEE Carboxylic Acids And Their Derivatives
  43. IIT JEE Chemical Equilibrium
  44. IIT JEE Chemistry Of Hydrocarbons Part 1
  45. IIT JEE Chemistry Of Hydrocarbons Part 2
  46. IIT JEE Chemistry Of Representative Elements
  47. IIT JEE Fundamental Concepts Of Organic Chemistry
  48. IIT JEE Surfaces And Catalysis
  49. IIT JEE Redox Reactions And Electrochemistry
  50. Mechanical Engineering Engineering Mechanics Part 1
  51. Mechanical Engineering Engineering Mechanics Part-2
  52. Programming Computer Architecture
  53. IIT JEE Purification Of Organic Compounds .
  54. IIT JEE Nuclear Chemistry
  55. Basic Civil Engineering Questions and Answers
Search
R4R Team
R4Rin Top Tutorials are Core Java,Hibernate ,Spring,Sturts.The content on R4R.in website is done by expert team not only with the help of books but along with the strong professional knowledge in all context like coding,designing, marketing,etc!