An alternating voltage V = 150 sin(314)t is supplied to a device which offers a resistance of 20 Ω in forward direction of electric current while preventing the flow of electric current in reverse direction. The form factor is ___________
1.0.57
2.0.318
3.1.414
4.1.57
Posted Date:-2022-06-02 03:19:31
At θ=π/2, positive portion is __________ negative portion in power cycle.
1.greater than
2. less than
3.equal to
4.greater than or equal to
Posted Date:-2022-06-02 03:47:25
In inductor, the energy delivered by source is ____________ by inductor.
1.stored as magnetic field
2.dissipated in the form of heat
3.returned to source
4.stored as electric field
Posted Date:-2022-06-02 03:44:06
A coil of 300 turns is wound on a non-magnetic core having a mean circumference of 300 mm and a cross sectional area of 300 mm2. The inductor of the coil corresponding to a magnetizing electric current of 3 A will be?
1.37.68 μH
2. 47.68 μH
3.113.04 μH
4.120.58 μH
Posted Date:-2022-06-02 03:20:12
A current waveform is of the shape of a right angled triangle with period of t = 1 sec. Given a resistance R = 1 Ω. The average power is __________
1.1 W
2.0.5 W
3.0.333 W
4.0.111 W
Posted Date:-2022-06-02 03:10:32
A network contains linear resistors and ideal voltage source s. If values of all the resistors are doubled, then voltage across each resistor is __________
1.Halved
2.Doubled
3.Increases by 2 times
4.Remains same
Posted Date:-2022-06-02 03:13:07
A particular electric current is made up of two component: a 10 A and a sine wave of peak value 14.14 A. The average value of electric current is __________
1.0
2.24.14 A
3. 10 A
4.14.14 A
Posted Date:-2022-06-02 03:14:22
Among the following, the active element of electrical circuit is ____________
1.Voltage source
2.Current source
3. Resistance
4.Voltage and current source both
Posted Date:-2022-06-02 03:14:54
Average power is also called?
1.apparent power
2.reactive power
3.true power
4.instantaneous power
Posted Date:-2022-06-02 03:51:44
Consider a resistive network circuit, having 3 sources of 18 W, 50 W and 98 W respectively and a resistance R. When all source act together the maximum and minimum power is ____________
1.98 W, 18 W
2.166 W, 18 W
3.450 W, 2 W
4.166 W, 2 W
Posted Date:-2022-06-02 03:09:58
Consider an electric motor having resistance of 10 Ω, 20 Ω and 30 Ω respectively. The percentage of energy dissipated by 10 Ω earthing plate is ____________
1.More than 50% of total energy
2.Less than 50% of total energy
3.Depends on the materials of the three plates
4.May be more or less than 50% of total energy
Posted Date:-2022-06-02 03:09:17
Consider the self-inductances of two coils as 12 H and 5 H. 50 % of one flux links the other. The mutual inductance is ___________
1.30 H
2.24 H
3.9 H
4.4.5 H
Posted Date:-2022-06-02 03:12:22
For a practical voltage source, which of the following is correct?
1.Cannot be less than source voltage
2.Cannot be higher than source voltage
3.Is always less than source voltage
4.Is always equal to source voltage
Posted Date:-2022-06-02 03:08:39
For a series RL circuit having L = 5 H, current = 1 A (at an instant). The energy stored in magnetic field is ___________
1.3.6 J
2.2.5 J
3.1.5 J
4.3 J
Posted Date:-2022-06-02 03:08:03
For a series RL circuit, the impedance Z = 10 Ω at a frequency of 50 Hz. At 100 Hz the impedance is ___________
1.10 Ω
2.20 Ω
3. 1 Ω
4.More than 1 Ω but less than 10 Ω 0 Ω
Posted Date:-2022-06-02 03:11:48
For reactive load, the power factor is equal to?
1.0
2. 1
3.2
4.3
Posted Date:-2022-06-02 03:51:12
Given a wire of resistance R Ω. The resistance of a wire of the same material and same weight and double the diameter is ___________
1.0.5 R
2.0.25 R
3.0.125 R
4. 0.0625 R
Posted Date:-2022-06-02 03:06:21
Given two mutually coupled coils have a total inductance of 1500 mH, the self-inductance of each coils if the coefficient of coupling is 0.2 is ____________
1.325 mH
2. 255 mH
3.625 mH
4.550 mH
Posted Date:-2022-06-02 03:11:12
If a circuit has complex impedance, the average power is ______
1.power stored in inductor only
2.power stored in capacitor only
3.power dissipated in resistor only
4.power stored in inductor and power dissipated in resistor
Posted Date:-2022-06-02 03:48:56
If there are M branch currents, then we can write ___________ number of independent equations.
1.M-2
2.M-1
3.M
4.M+1
Posted Date:-2022-06-02 03:56:31
If there is complex impedance in a circuit, part of energy is ____________ by reactive part and part of its energy is ____________ by the resistance.
1.alternately stored and returned, alternately stored and returned
2.alternately stored and returned, dissipated
3.dissipated, alternately stored and returned
4.dissipated, dissipated
Posted Date:-2022-06-02 03:45:29
If we apply a sinusoidal input to RL circuit, the current in the circuit is __________ and the voltage across the elements is _______________
1.square, square
2.square, sinusoid
3.sinusoid, square
4.sinusoid, sinusoid
Posted Date:-2022-06-02 03:42:11
If we apply a sinusoidal voltage to a circuit, the product of voltage and current is?
1.true power
2.apparent power
3.average power
4.reactive power
Posted Date:-2022-06-02 03:52:18
Impedance is a complex quantity having the real part as _______ and the imaginary part as ______
1.resistance, resistance
2.resistance, reactance
3.reactance, resistance
4.reactance, reactance
Posted Date:-2022-06-02 03:21:17
In capacitor, the energy delivered by source is ____________ by capacitor.
1.returned to source
2.dissipated in the form of heat
3. stored as electric field
4. stored as magnetic field
Posted Date:-2022-06-02 03:44:42
In case of resistive load, what is the power factor?
1.4
2.3
3.2
4.1
Posted Date:-2022-06-02 03:50:35
In purely resistive circuit, energy delivered by source is ____________ by resistance.
1.dissipated in the form of heat
2.stored as electric field
3. stored as magnetic field
4.returned to source
Posted Date:-2022-06-02 03:43:30
In Reciprocity Theorem, which of the following ratios is considered?
1.Voltage to current
2.Current to current
3.Voltage to voltage
4.No ratio is considered
Posted Date:-2022-06-02 02:55:02
In superposition theorem when we consider one voltage source, all the other voltage sources are ___________
1.Shorted
2.Removed
3.Undisturbed
4. Opened
Posted Date:-2022-06-02 02:54:18
Instantaneous power is negative, when the polarities of voltage and current are of __________
1.opposite sign
2.same sign
3.voltage is zero
4.current is zero
Posted Date:-2022-06-02 03:46:46
Potential of earth is – 50 V. If the potential difference between anode and cathode (earthed) is measured as 150 V, actual voltage on anode is __________
1.0 V
2.100 V
3.200 V
4.250 V
Posted Date:-2022-06-02 03:18:52
Reactive power is expressed in?
1.Watts (W)
2.Volt Amperes Reactive (VAR)
3.Volt Ampere (VA)
4. No units
Posted Date:-2022-06-02 03:55:26
The basic elements of an electric circuit are _____________
1.R, L and C
2.Voltage
3. Current
4.Voltage as well as current
Posted Date:-2022-06-02 03:15:36
The charge associated with a bulb rated as 20 W, 200 V and used for 10 minutes is ____________
1.36 C
2.60 C
3.72 C
4.50 C
Posted Date:-2022-06-02 03:07:30
The energy stored in the magnetic field at a solenoid 100 cm long and 10 cm diameter wound with 1000 turns of wire carrying an electric current of 10 A, is ___________
1.1.49 J
2.0.49 J
3.0.1 J
4.1 J
Posted Date:-2022-06-02 03:16:13
The form factor of sinusoidal alternating electric current is ___________
1.0
2.1
3.1.11
4. 1.15
Posted Date:-2022-06-02 03:17:39
The highest power factor will be?
1.1
2.2
3.3
4.4
Posted Date:-2022-06-02 03:49:53
The linear circuit element among the following is ___________
1.Capacitor
2.Inductor
3.Resistor
4.Capacitor & Inductor
Posted Date:-2022-06-02 03:13:40
The power factor is called leading power factor in case of ____ circuits.
1.LC
2.RC
3.RL
4.RLC
Posted Date:-2022-06-02 03:53:59
The power factor is the ratio of ________ power to the ______ power.
1.average, apparent
2.apparent, reactive
3.reactive, average
4.apparent, average
Posted Date:-2022-06-02 03:53:22
The power factor=?
1.sinθ
2.cosθ
3.tanθ
4.secθ
Posted Date:-2022-06-02 03:52:49
The Reciprocity Theorem is applicable for __________
1.Single-source networks
2.Multi-source networks
3.Both Single and Multi-source networks
4.Neither Single nor Multi-source networks
Posted Date:-2022-06-02 02:56:27
The Reciprocity Theorem is valid for ___________
1.Non-Linear Time Invariant circuits
2.Linear Time Invariant circuits
3.Non-Linear Time Variant circuits
4. Linear Time Variant circuits
Posted Date:-2022-06-02 02:55:38
The rms value of the sine wave is 100 A. Its peak value is ____________
1.70.7 A
2.141.4 A
3.150 A
4.282.8 A
Posted Date:-2022-06-02 03:18:16
The star equivalent resistance of 3 resistors having each resistance = 5 Ω is ____________
1.1.5 Ω
2.1.67 Ω
3.3 Ω
4. 4.5 Ω
Posted Date:-2022-06-02 03:06:57
The Superposition Theorem is not applicable for _________
1.Power calculation
2.Voltage calculation
3.Current Calculation
4.Both Voltage and Current calculation
Posted Date:-2022-06-02 02:53:26
The temperature coefficient of a metal as the temperature increases will ____________
1.Decreases
2.Increases
3.Remains unchanged
4.Increases and remains same
Posted Date:-2022-06-02 03:05:44
The term lagging power factor is used in which circuits?
1.RLC
2.RC
3.RL
4.LC
Posted Date:-2022-06-02 03:54:35
The time varying part in the equation of instantaneous power has frequency ________________ that of the frequency of voltage or current wave forms.
1.equal to
2.twice
3.thrice
4.four times
Posted Date:-2022-06-02 03:46:11
The two windings of a transformer have an inductor of 2 H each. If mutual inductor between them is also 2 H, then which of the following is correct?
1.Turns ratio of the transformer is also 2
2. Transformer is an ideal transformer
3.It is a perfect transformer
4.It is a perfect as well as an ideal transformer
Posted Date:-2022-06-02 03:16:58